70 442 Street/Strip Roller
#1
70 442 Street/Strip Roller
Very nicely done 70 442 rolling chassis.Real 442.This car belongs to Marty Zimmerman.You couldn't build one for what he wants for it,but most might still think it's too much.You can reach him at 704-779-1759
red70442.jpg
red704421.jpg
red704422.jpg
red704423.jpg
red704424.jpg
red704425.jpg
red704426.jpg
red704428.jpg
red704429.jpg
red7044210.jpg
red7044211.jpg
red7044212.jpg
red70442.jpg
red704421.jpg
red704422.jpg
red704423.jpg
red704424.jpg
red704425.jpg
red704426.jpg
red704428.jpg
red704429.jpg
red7044210.jpg
red7044211.jpg
red7044212.jpg
#3
There is more that can come with the car,that is not pictured.
The car came from Colorado,and was originally an AC car,now converted to non-AC.The floor hump has been set-up to take any type of 4,5,or 6-spd trans.The whole chassis has been redone.The rear is a 12-bolt Chevy,with 4:11's,spool,girdle,etc.The body has been painted,but NOT cleared.the plans were to paint the color,lay the stripes,then clear it,but that has not been done yet.The only panel not painted is the hood.He has a repop glass OAI hood for it.His plans were to either get one of the bigger hoods,or modify his,then paint it,but that didn't happen.
The engine available is a 462,with stroked 425 crank,and all the good stuff,.700" lift solid roller,ported Edelbrocks,done right.Your typical 600HP build,that runs on pumpgas.No bogus numbers or bullshit.The transmission available is a T101 from Kasey Kahne.
This is not some backyard half-*** project,as you might have figured-out already.
The car came from Colorado,and was originally an AC car,now converted to non-AC.The floor hump has been set-up to take any type of 4,5,or 6-spd trans.The whole chassis has been redone.The rear is a 12-bolt Chevy,with 4:11's,spool,girdle,etc.The body has been painted,but NOT cleared.the plans were to paint the color,lay the stripes,then clear it,but that has not been done yet.The only panel not painted is the hood.He has a repop glass OAI hood for it.His plans were to either get one of the bigger hoods,or modify his,then paint it,but that didn't happen.
The engine available is a 462,with stroked 425 crank,and all the good stuff,.700" lift solid roller,ported Edelbrocks,done right.Your typical 600HP build,that runs on pumpgas.No bogus numbers or bullshit.The transmission available is a T101 from Kasey Kahne.
This is not some backyard half-*** project,as you might have figured-out already.
#4
Hey Brian! this is Tim. So how much does he have to have for it with and without motor/trans.? and is there any room for a trade. Not sure if I can afford it right
now but, just throwing it out there...
now but, just throwing it out there...
Thread
Thread Starter
Forum
Replies
Last Post
anthonylenhardt
Cars For Sale
0
March 28th, 2007 11:30 PM
<johnny5>
Cars Wanted
0
August 25th, 2005 12:46 PM