Intake manifolds

FL1970442 · 09-05-2007, 08:43 PM

Hello, I have an original 70 442 convertible with it's original 455.
I sold it a number of years ago, and recently bought it back.
The guy stuck a mondello high rise intake, & a holley 850 carb on it.
It has a 3200 stall, and a 110 degree comp roller race cam.
Question, I'd like to put the original intake back on. Other than some
h.p. loss, will I have other problems?

Olds64 · 09-06-2007, 05:27 AM

If you go back to the original intake then you should put a stock torque converter and carb into it as well. I wouldn't want a 3200 stall in my car if everything else was stock. You might want to ask him if he changed the cam as well.

$tryker · 09-08-2007, 05:46 PM

Seems you may have low vacuum at idle for the power brakes with that set up. I agree with Olds64, the stock converter would better suit a stock intake. Personally, I would go with Crane cam and a lobe centerline around 114. If you decide to go back to the stock intake and are willing to unload the Mondello top half, then send a PM. I would be interested. Other then that, it still can be street driven, it just depends on your preference. Good luck!

FL1970442 · 09-11-2007, 05:32 AM

Thanks for the advice

09-05-2007, 08:43 PM	#1 (permalink)
FL1970442 Member Join Date: Sep 2007 Posts: 25	Intake manifolds Hello, I have an original 70 442 convertible with it's original 455. I sold it a number of years ago, and recently bought it back. The guy stuck a mondello high rise intake, & a holley 850 carb on it. It has a 3200 stall, and a 110 degree comp roller race cam. Question, I'd like to put the original intake back on. Other than some h.p. loss, will I have other problems?

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
exhaust manifolds	mr-tom	Parts Wanted	2	07-24-2007 10:30 AM
changing manifolds.	rocket9r8	Ninety-Eight	9	03-02-2007 04:55 AM
Manifolds needed	Eightupman	Parts Wanted	0	11-06-2006 04:48 PM
1955 ninety-eight intake manifolds	joewit	Ninety-Eight	2	10-23-2006 05:11 PM
Exhaust manifolds 69 98	Landcrusier	Parts Wanted	3	10-12-2006 12:03 PM

09-06-2007, 05:27 AM	#2 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,811	If you go back to the original intake then you should put a stock torque converter and carb into it as well. I wouldn't want a 3200 stall in my car if everything else was stock. You might want to ask him if he changed the cam as well.

09-08-2007, 05:46 PM	#3 (permalink)
$tryker Member Join Date: May 2007 Location: Belle River Ontario Posts: 46	Seems you may have low vacuum at idle for the power brakes with that set up. I agree with Olds64, the stock converter would better suit a stock intake. Personally, I would go with Crane cam and a lobe centerline around 114. If you decide to go back to the stock intake and are willing to unload the Mondello top half, then send a PM. I would be interested. Other then that, it still can be street driven, it just depends on your preference. Good luck!

09-11-2007, 05:32 AM	#4 (permalink)
FL1970442 Member Join Date: Sep 2007 Posts: 25	Thanks for the advice