ClassicOldsmobile.com
0 2016/11/10 08:35:25
Assembly can continue.
Assembly can continue.
0 2017/06/06 06:13:16
Only bad spot in the floor!
Only bad spot in the floor!
0 2020/12/15 13:34:09
0 2020/12/15 13:35:06
Filled some misc. holes in the firewall that were added or not needed.
Filled some misc. holes in the firewall that were added or not needed.
0 2020/12/15 13:36:47
There were 23 holes under the dash.. Sigh
There were 23 holes under the dash.. Sigh
0 2020/12/15 13:37:46
Hauled the car over to Indy Pro Strip where it went into a phosphorous acid tank. Paint, rust and undercoat gone!
Hauled the car over to Indy Pro Strip where it went into a phosphorous acid tank. Paint, rust and undercoat gone!
0 2020/12/15 13:39:01
0 2020/12/17 17:45:13
0 2020/12/17 17:45:42
0 2020/12/17 17:46:28
0 2020/12/17 17:47:07
0 2020/12/17 17:47:26
0 2020/12/17 17:47:50
0 2020/12/17 17:48:08
0 2020/12/17 17:48:27
0 2020/12/17 17:48:43
0 2020/12/23 10:42:33
0 2021/03/15 19:00:54
0 2021/03/15 19:01:02
0 2021/03/15 19:01:09
0 2021/03/15 19:01:18
Finally got the body back on the frame. Still plenty to do...
Finally got the body back on the frame. Still plenty to do...
0 2021/12/27 15:38:15
0 2021/12/27 15:40:14
0 2021/12/27 15:40:21
0 2021/12/27 15:40:29
0 2021/12/27 15:40:39
0 2021/12/27 15:40:46
Ended up being a pretty good hood overall. Had it bead blasted and the damage is minimal. Looks like it took a shot to the nose at some time in it's life.
Ended up being a pretty good hood overall. Had it bead blasted and the damage is minimal. Looks like it took a shot to the nose at some time in it's life.
0 2021/12/27 15:48:12
Previous life had a nut braised into a hole.
Previous life had a nut braised into a hole.
0 2021/12/27 15:48:22
New metal with a shoulder nut welded to the back side will clean things up.
New metal with a shoulder nut welded to the back side will clean things up.
0 2021/12/27 15:48:29
The guy I bought this from said one of the owners had Chevelle style hood pins on this hood.
The guy I bought this from said one of the owners had Chevelle style hood pins on this hood.
0 2021/12/27 15:48:36
Probably going to cut this out. Would be nice if I could find a picture of a hood hole without the bracket to use for reference. I'll probably just center a hole with the fiberglass hole and make it just big enough to get the pin through.
Probably going to cut this out. Would be nice if I could find a picture of a hood hole without the bracket to use for reference. I'll probably just center a hole with the fiberglass hole and make it just big enough to get the pin through.
0 2021/12/27 15:48:44
0 2024/09/25 10:11:39
Repair identified in this view.
Repair identified in this view.
0 2024/09/25 10:11:19
0 2024/09/25 10:11:12
0 2024/09/25 10:11:03
0 2024/09/25 10:10:54
0 2024/09/25 10:11:30
0 2024/09/25 10:10:46
0 2024/09/25 10:10:36