montvaleplace

I am about to install a m20 in my vista that is currently a console straight shifter and am wondering if anyone has measurements for the hump location and some pics? I am using an aftermarket hump and therefore don't have a used hump with reference material. Thanks in advance, you guys are always a great help...

2blu442

Here's some pictures from a 1968 442 floorboard. Let me know if there's any other measurements that you'd like to see. John

P6080961.jpg

P6080960.jpg

P6080964.jpg

P6080963.jpg

P6080966.jpg

P6080967.jpg

P6080968.jpg

P6080969.jpg

P6080974.jpg

P6080971.jpg

P6080972.jpg

P6080973.jpg

montvaleplace

Thanks John that was quick. Fusicks reproduction has a raised tunnel with a flat top is it correct or should I have the style you pictured? My car is a 70 vista with console.

2blu442

Well, I'm not an expert but the 1968-70 Oldsmobile 4 speed humps I've seen are rounded like this one. If you want to create another thread asking what would have been original you could used one of these pictures plus one of the piece you have. John

allyolds68

70-72 is in a different location than 68-69.