When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
2 th375
I have some parts left, 1974 - 76 delta 88, 2 good th375's, some STEERING columns, dash & interrior, instrument clusterss, a.c. compressor & brackets, drive shafts, 74 tail lights, odds & ends, etc.
Last edited by bigdooly; Aug 20, 2019 at 06:59 PM.
Any idea if the power antenna works? If so, what ya want for it?
Thanks, Reggie
Hi Reggie, not sure if it works or not. will try to check it out after work today, weather permitting. I also have boxes of parts that came with another car I bought recently, I will look through & get back to you.
Looking for passenger side sun visor with lite mirror for 75 olds delta 88 convertible. Hinge on mine breaking away. Ours is red but should be able to dye/paint a clean one.??? Thans, Don
Looking for passenger side sun visor with lite mirror for 75 olds delta 88 convertible. Hinge on mine breaking away. Ours is red but should be able to dye/paint a clean one.??? Thans, Don
Hi Don, don't have any visors with lighted mirror, if I'm understanding correctly. I have a couple of visors you could possibly strip the hinge from. I have a black one with a small tear, from a 74 coupe, mirror missing. I 'll see photo if you like.
Jim
Bigdooly - I never saw a PM. If you have some door panels, I might be interested. mine were 'redone' and they're not very good.
thanks,
Mike
Sorry Mike. Do you need all the panels? Upper , lower, front , rear? I have front left & right upper & lower, not perfect. I will send photos when I get a chance.
I don't have rear panels to spare, as I need them for my car. Sorry about pm must have gotten side tracked.
Just what I'm looking for. Looks like its in pretty good condition. I'd also be interested in that piece of fender trim on the front left side. I really need it for the rear drivers side fender but hopefully they are identical.
Just what I'm looking for. Looks like its in pretty good condition. I'd also be interested in that piece of fender trim on the front left side. I really need it for the rear drivers side fender but hopefully they are identical.
wheel well Moldings different front to rear, I have a bunch of them for the front fenders, and a few rears, I will go throu them today, and get back to you, Right Rear is what you need specifically, correct?
wheel well Moldings different front to rear, I have a bunch of them for the front fenders, and a few rears, I will go throu them today, and get back to you, Right Rear is what you need specifically, correct?
how about an am/fm 8 track radio for my 76 delta 88?
Radio is AM only- 8 Track, No FM, sorry. First one I've ever seen.
It is a GM radio. If still interested, let me know, and I'll test it out, there are no speakers in the car.
Thanks, Jim
wheel well Moldings different front to rear, I have a bunch of them for the front fenders, and a few rears, I will go throu them today, and get back to you, Right Rear is what you need specifically, correct?
Regarding wheel well trim, 1 have 9 pieces only 1 of which is a left rear. I need to save this for my car. The FRONT AND REAR ARE NOT THE SAME, I matched all piece to parts car just to make sure.
Left front compated to left rear
I have 3 left front
1 right front
1 right rear, that I can part with.
Sorry. I am still looking for coolant reservoir bracket.
Thanks for you patience.
wheel well Moldings different front to rear, I have a bunch of them for the front fenders, and a few rears, I will go throu them today, and get back to you, Right Rear is what you need specifically, correct?
Regarding wheel well trim, 1 have 9 pieces only 1 of which is a left rear. I need to save this for my car. The FRONT AND REAR ARE NOT THE SAME, I matched all piece to parts car just to make sure.
Left front compated to left rear
I have 3 left front
1 right front
1 right rear, that I can part with.
Sorry. I do not have an extra bracket for coolant reservoir. I did find cap.
I'd be interested in any of these if you are willing to part with them
-Pinch Weld Molding
-Steering wheel (not the whole column)
-Right front inner wheel well
It's in good shape, a couple of the bolt holes where it attaches to wheel arch in fender broke , but otherwise solid, no cracks, one of the better ones I've come across.
Bigddoley I think I might have found one here local, a guy I bought some parts from had a bunch of radios on a shelf and I think hes got one for me Thanks for the reply
Bigddoley I think I might have found one here local, a guy I bought some parts from had a bunch of radios on a shelf and I think hes got one for me Thanks for the reply
what kind of money would you have to have for a LH front wheel opening and the LH rocker molding and I would appreciate pretty nice stuff as I had a tire explode and mine were almost mint. T
hanks
what kind of money would you have to have for a LH front wheel opening and the LH rocker molding and I would appreciate pretty nice stuff as I had a tire explode and mine were almost mint. T
hanks
Sorry to hear of your mis fortune. I have a few L/H front moldings, I've sold a few at $30 + shipping. I jut sold a pair of rocker moldings, $ 45 ea. The one on black conv is still available. I will Pm my ph # if you prefer to call. Thanks , Jim
75' 88 conv. parts. Also 74 parts
good running 350 / 2 th375 trannys, steering columns, instrument clusters, accessory brackets, seatbelts, lots of stuff from numerous 88's Ive parted. The 74 convertible has been scraped, but still have some parts. The 75 has a bent chassis , and the tail lights have been sold.