Anyone use the Pypes 2.5" factory tips with a non cut out bumper?
#1
Out of Line, Everytime😉
Thread Starter
Join Date: Dec 2006
Location: Melville, Saskatchewan
Posts: 9,144
Anyone use the Pypes 2.5" factory tips with a non cut out bumper?
It may not matter as my tail pipes are custom. If anyone has pics even with the cut out bumpers of them installed, that would be great. I have 18" long tips that need modifications to not stick out, hillbilly too far.
#4
#5
Out of Line, Everytime😉
Thread Starter
Join Date: Dec 2006
Location: Melville, Saskatchewan
Posts: 9,144
Thanks, my tail pipes are in a few good inches toward the frame compared to the factory cut outs. They will look good as my pipes exit slightly lower, so they should look right.
#7
Out of Line, Everytime😉
Thread Starter
Join Date: Dec 2006
Location: Melville, Saskatchewan
Posts: 9,144
#10
Out of Line, Everytime😉
Thread Starter
Join Date: Dec 2006
Location: Melville, Saskatchewan
Posts: 9,144
Tips that stick out way too far, I would cut.where the tail pipes are attached to the welded hangers. So for $60 worth of hangers and the effort to cut off the old ones, the factory style tips are a no brainier.
#12
Out of Line, Everytime😉
Thread Starter
Join Date: Dec 2006
Location: Melville, Saskatchewan
Posts: 9,144
Thread
Thread Starter
Forum
Replies
Last Post
Ctls442
Parts For Sale
4
July 7th, 2018 05:08 PM
L77F85
General Discussion
0
September 4th, 2016 03:42 PM
MDchanic
Wheels and Tires
22
August 4th, 2011 10:23 AM
81 regency
Parts For Sale
0
April 21st, 2011 06:18 PM