DJS70cutlass
Thread Starter
Engine / Small Blocks Today 09:47 PM
olds 307 and 403
Does your air cleaner look like this?
General / The Clubhouse Today 09:26 PM
I think purple cap roundup is no longer available. I am using the last of mine and have commercial packaged stuff. I just put down 4 gallons of mix tonight. Ditches, driveway, and around the house. I...
olds 307 and 403
Thread Starter
Engine / Small Blocks Today 09:12 PM
I finally fixed the fast idle, it was either none or all of it, like 2500 rpm. The cam must have been bent somewhat, looked normal. I had a spare, now1500 rpm on the highest cam and maybe 1300 on the...
Tirediron
Thread Starter
Transmission and Driveline / Transmission Today 08:54 PM
I pulled the pan and am surprised at how clean everything looks.
I put a new filter in it. And new pan and gasket. Next. I'll going to put new front and rear seals....
Engine / Small Blocks Today 08:49 PM
Some prefer to use only sealant on the front and rear of the intake leaving out the rubber seals. Probably worth searching this or maybe someone will chime in on what sealant they have recently used...
Large Oldsmobiles / Eighty-Eight Today 07:35 PM
I can do that for you. I have a 1964 Dynamic 88. I too am unsure of the actual length, but mine (as I recall) has a notch that kind of locks the cap to the dip stick for proper depth. I'll look...
davek1661
Thread Starter
Large Oldsmobiles / Eighty-Eight Today 07:24 PM
Way back in December- or even November 2025- I picked up a bumper core for my Dynamic 88. It set me back $800 including shipping. I sent it out to a local shop to be chromed, and they found problems...
Engine / Big Blocks Today 07:21 PM
Use the pulley reinforcement ring for an Oldsmobile: 1969-72 Oldsmobile Crank Pulley Reinforcement Spacer, Also 1979 Trans Am Olds 403 Engine
Oldsmobile Cars / Cars For Sale Today 07:11 PM
oooofdah!!!!!
brotherGood
Thread Starter
Repair & Restoration / Major Builds & Projects Today 07:04 PM
Well, come to find out..the converter wasnt really the culprit after all. The flexplate was loose..so everything got torqued back down, transmission pump checked for damage and reinstalled, and we...