oil filter housing for a 330 ci

67_cutlass_s · September 7th, 2007, 09:59 PM

i need a oil filter housing for a 330 that will clear my exhaust manifold i thought i had the right one but i guess not

joe_padavano · September 8th, 2007, 10:47 AM

Quote:

Originally Posted by 67_cutlass_s

i need a oil filter housing for a 330 that will clear my exhaust manifold i thought i had the right one but i guess not

If you're talking about the oil filter adapter that bolts to the side of the block, there are only two flavors for all Olds V8s, Toronado and all RWD applications.

Olds64 · September 8th, 2007, 03:39 PM

Joe, do you know if the Toro oil filter housing would allow more clearance for headers or exhaust? This is something I might be running into if I do a 394/455 swap.

67_cutlass_s · September 8th, 2007, 03:49 PM

i guess the right exhaust manofolds are diff for the small blocks then i have the manifolds for a 69-72 350 for dual exhaust

September 7th, 2007, 09:59 PM	#1 (permalink)
67_cutlass_s Junior Member Join Date: May 2007 Posts: 3	oil filter housing for a 330 ci i need a oil filter housing for a 330 that will clear my exhaust manifold i thought i had the right one but i guess not

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Filter Conversion To Spin On	J'ville	Eighty-Eight	2	July 10th, 2009 04:18 PM
spin on oil filter adaptor 1955' 88	GTC	Eighty-Eight	6	February 7th, 2008 02:18 PM
Toro oil filter adapter	texasred	Parts Wanted	2	July 13th, 2007 09:53 PM
replacement oil filter	delkron97	Small Blocks	3	July 5th, 2006 04:52 PM
replacement oil filter	delkron97	Small Blocks	5	May 16th, 2006 10:44 AM

September 8th, 2007, 03:39 PM	#3 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 4,286	Joe, do you know if the Toro oil filter housing would allow more clearance for headers or exhaust? This is something I might be running into if I do a 394/455 swap.

September 8th, 2007, 03:49 PM	#4 (permalink)
67_cutlass_s Junior Member Join Date: May 2007 Posts: 3	i guess the right exhaust manofolds are diff for the small blocks then i have the manifolds for a 69-72 350 for dual exhaust