Toro oil filter adapter

texasred · July 13th, 2007, 10:47 AM

Purely a side project (seeing if we can fit W/Z manifolds on a 350 SBO) so don't want to invest a lot.

Can ya help a brotha out?

C.J.

2blu442 · July 13th, 2007, 08:49 PM

C.J. I should have one. I'll try to dig through the clutter this weekend and see what I come up with. It would be late 1960's and it sounds like your looking for the angle that the Toro's used on that part. John

texasred · July 13th, 2007, 09:53 PM

Thanks, Blu.

You are correct on our thoughts about the angle. The manifold hits the stock Cutlass one and maybe the angle to clear the Toro starter will be enough. Toros from 66-75 (and maybe later...that's as far as my book goes) used the same part number.

No rush on finding it. I told you this is really a side project. And let me know what you want for it.

C.J.

July 13th, 2007, 10:47 AM	#1 (permalink)
texasred Tom Servo's Stunt Double Join Date: Apr 2004 Location: San Antonio, Texas Posts: 824	Toro oil filter adapter Purely a side project (seeing if we can fit W/Z manifolds on a 350 SBO) so don't want to invest a lot. Can ya help a brotha out? C.J. __________________ Dad said, "Sometimes you read Job...sometimes you ARE Job!"

July 13th, 2007, 08:49 PM	#2 (permalink)
2blu442 Moderator Join Date: Sep 2006 Location: Medford, Oregon Posts: 2,256	C.J. I should have one. I'll try to dig through the clutter this weekend and see what I come up with. It would be late 1960's and it sounds like your looking for the angle that the Toro's used on that part. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1967 Cutlass four door daily driver 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

July 13th, 2007, 09:53 PM	#3 (permalink)
texasred Tom Servo's Stunt Double Join Date: Apr 2004 Location: San Antonio, Texas Posts: 824	Thanks, Blu. You are correct on our thoughts about the angle. The manifold hits the stock Cutlass one and maybe the angle to clear the Toro starter will be enough. Toros from 66-75 (and maybe later...that's as far as my book goes) used the same part number. No rush on finding it. I told you this is really a side project. And let me know what you want for it. C.J. __________________ Dad said, "Sometimes you read Job...sometimes you ARE Job!"

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode