Power Stearing Pump Bracket

mcutlass1969 · January 19th, 2007, 01:31 PM

Looking for a power stearing pump bracket to fit my F Block from a 1976 Toronado.

crazy'boutOlds · January 19th, 2007, 01:34 PM

I have a set from a 403. Will they work?

mjscutlass · January 19th, 2007, 04:34 PM

The 403 one's will work but if u cannot get ahold of crazy i have one set also

crazy'boutOlds · January 19th, 2007, 04:45 PM

Get mjscutlass ones. He's a good person to deal with.

mcutlass1969 · January 19th, 2007, 06:17 PM

Ok email me at michael_kenny@csgsystems.com and let me know what you are asking me for them. Shipping zip code is Omaha NE. 68138.

mcutlass1969 · January 19th, 2007, 06:19 PM

also this is for a 455. Forgot to state that.

crazy'boutOlds · January 19th, 2007, 06:21 PM

Why didn't you get the other set from your previous post?

mjscutlass · January 19th, 2007, 06:25 PM

email sent mine is off of a 455 but there is no difference between 455 and 350. I have a 307 power steering pump hooked up on my 455 in my 83 cutlass even all the pulleys mount up the only thing i had to change from the 307 to the 455 is the lower alternater bracket

mcutlass1969 · January 20th, 2007, 01:08 PM

Ok one post to clear up things. 455 block is from a 76 Toronado. Didn't have the car just picked up the motor form a local junk yard, so the brackets were not available. So this leads me to the next thing. I have rebuilt the 455 and now putting it in a 69 cutlass S. I found an upper Alt bracket but no luck locally. The only bracket and pump I have is from the 350 i pulled out of the cutlass. this leads me to my next question since the 350 bracket doesn't bring the pulley far enough forward then all is needed is to switch out the pulley or do I still need the bracket for the 455

mjscutlass · January 20th, 2007, 02:09 PM

yes that is correst just change the pulleys and u should be good

mcutlass1969 · January 20th, 2007, 04:58 PM

ok by chance do you have a pulley or advice on were to get one. Junk yards around here don't keep the old cars.

mjscutlass · January 20th, 2007, 05:04 PM

Do u have air conditioning in ur car and are u running the same pulleys

January 19th, 2007, 01:31 PM	#1 (permalink)
mcutlass1969 Registered User Join Date: Apr 2006 Posts: 75	Power Stearing Pump Bracket Looking for a power stearing pump bracket to fit my F Block from a 1976 Toronado.

January 19th, 2007, 04:34 PM	#3 (permalink)
mjscutlass Member Join Date: Nov 2006 Location: akron OH. Posts: 49	parts The 403 one's will work but if u cannot get ahold of crazy i have one set also

January 19th, 2007, 06:25 PM	#8 (permalink)
mjscutlass Member Join Date: Nov 2006 Location: akron OH. Posts: 49	email email sent mine is off of a 455 but there is no difference between 455 and 350. I have a 307 power steering pump hooked up on my 455 in my 83 cutlass even all the pulleys mount up the only thing i had to change from the 307 to the 455 is the lower alternater bracket

January 20th, 2007, 02:09 PM	#10 (permalink)
mjscutlass Member Join Date: Nov 2006 Location: akron OH. Posts: 49	change pullys yes that is correst just change the pulleys and u should be good

January 20th, 2007, 05:04 PM	#12 (permalink)
mjscutlass Member Join Date: Nov 2006 Location: akron OH. Posts: 49	find Do u have air conditioning in ur car and are u running the same pulleys

January 19th, 2007, 01:34 PM	#2 (permalink)
crazy'boutOlds Registered User Join Date: Jan 2007 Location: Youngstown, Ohio Posts: 401	I have a set from a 403. Will they work?

January 19th, 2007, 04:45 PM	#4 (permalink)
crazy'boutOlds Registered User Join Date: Jan 2007 Location: Youngstown, Ohio Posts: 401	Get mjscutlass ones. He's a good person to deal with.

January 19th, 2007, 06:17 PM	#5 (permalink)
mcutlass1969 Registered User Join Date: Apr 2006 Posts: 75	Ok email me at michael_kenny@csgsystems.com and let me know what you are asking me for them. Shipping zip code is Omaha NE. 68138.

January 19th, 2007, 06:19 PM	#6 (permalink)
mcutlass1969 Registered User Join Date: Apr 2006 Posts: 75	also this is for a 455. Forgot to state that.

January 19th, 2007, 06:21 PM	#7 (permalink)
crazy'boutOlds Registered User Join Date: Jan 2007 Location: Youngstown, Ohio Posts: 401	Why didn't you get the other set from your previous post?

January 20th, 2007, 01:08 PM	#9 (permalink)
mcutlass1969 Registered User Join Date: Apr 2006 Posts: 75	Ok one post to clear up things. 455 block is from a 76 Toronado. Didn't have the car just picked up the motor form a local junk yard, so the brackets were not available. So this leads me to the next thing. I have rebuilt the 455 and now putting it in a 69 cutlass S. I found an upper Alt bracket but no luck locally. The only bracket and pump I have is from the 350 i pulled out of the cutlass. this leads me to my next question since the 350 bracket doesn't bring the pulley far enough forward then all is needed is to switch out the pulley or do I still need the bracket for the 455

January 20th, 2007, 04:58 PM	#11 (permalink)
mcutlass1969 Registered User Join Date: Apr 2006 Posts: 75	ok by chance do you have a pulley or advice on were to get one. Junk yards around here don't keep the old cars.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode