junior supercar

removed from a 69 Cutlass S. includes the condensor, condensor mounting brackets and hardware, both hoses from compressor to condensor, compressor with a very nice factory decal on it, evaporator housing with evaporator and POA valve, heater core case with heater core and mounting hardware, vacuum diaphram in passenger kick panel with mounting ring and hardware, dash controls with vacuum lines and working temp cable, center a/c vent, all compressor mounting brackets and mounting hardware. the heater core was bypassed so assume it needs a rebuild or replacement and the a/c belt wasn't installed, so assume the system needs to be gone through. It was pressurized when I removed the hose from the condensor. Asking $400 for whats left. Willing to separate some things. All plus shipping which which may cost a little bit given the size of some items. Also, I probably have a few other misc items that could be included. Let me know of any questions.



100_4693_zpszoiezfe7.jpg

100_4694_zpsmlugmh6j.jpg

100_4695_zpsisttygo5.jpg

100_4696_zpsehvtnjph.jpg

100_4697_zpswagxadqk.jpg

100_4698_zpsu0qvz6hs.jpg

100_4699_zpsrvz8qreq.jpg

100_4700_zpsxtttoyvu.jpg

100_4701_zpsmqu92bra.jpg


100_4702_zpstczoq0tw.jpg

100_4703_zps5se2a6ki.jpg

100_4704_zpsse2papv4.jpg

Bitburger

Do you have any of the plastic AC duct work left? I need the LH Transition duct GM part #399411 ( I think )

Thanks

pfergy600

How much do you want for the 2 Rectangular AC Ducts ?

junior supercar

thats a correct part nbr. but sorry, I sold that a while ago.

junior supercar

it's only one duct. I took a pic from both sides to show the condition. $25 plus shipping for the duct (#404144 for those looking at a PIM)

pfergy600

So that is the drivers side ac duct and will it work with 72 Cutlass? Is there any tears in the duct at all?

junior supercar

nope passenger side, as stated (well into the text) of the original ad. the driver side is a hard plastic duct that bitburger is also looking for. I have no idea if it can be made to fit the driver side of a 72 (assuming you want to try that). As for fitting the passenger side of a 72, not sure. I do know the end which attaches to the manifold off the heater core would work. But no idea on the end which goes to the passenger dash vent. my 70 is a non a/c post, so no dash vents for me to compare. I'd have to dig out my parts book.

Bitburger

do you still have this piece ?

Trophyblue442

Do you still have the alternator bracket?

junior supercar

still have everything.

may considering separating things as it's all in the way, let me know what you are interested in

Bitburger

PM sent

Trophyblue442

Pm sent

Bitburger

still interested in the passenger side flexduct PM sent

Bitburger

Your PM inbox is overloaded. Any progress on this flexduct ?

junior supercar

was out of town, plan to work on boxing up items this week for those interested

junior supercar

alt brackets sold

everything else still available. could do a parts/cash trade too if anyone is interested in anything

junior supercar

bump

delmontcrusier

Since you have this listed for 68 up I don't suppose this will work for a 67.

junior supercar

well, this is A body stuff.
I'm guessing you have a delmont, but no idea if it'll work.

junior supercar

ttt

twleckie

Do you have any of the distribution manifold and center vent. Need hoses also Thx todd 519 330 5744

junior supercar

no distribution manifold, but I do have the center vent. have the end vents in the dash also.

KDW

Pm sent

SMOSLEY

do you have any of this still available?

junior supercar

yep, still all available

bigin1978

I need the hose from the poa to the compressor with the foam on it. my foam is all destroyed. is that hose available?