real57vetteguy

I have a set of SUPER nice Holley valve covers, the fins are still rounded at the tops, they have a couple very minor blemishes but these are the nicest set I have ever seen. They are polished to a show finish and painted with a high heat textured stainless paint. 250.00 including shipping! ***********PRICE REDUCED**************

IMG_20140420_115339997_zpszdswjri5.jpg

IMG_20140420_115408131_zpsalbqvcig.jpg

IMG_20140420_163252192_zpsoyehofmd.jpg

IMG_20140420_163317627_zps5b9wvskk.jpg

IMG_20140420_163746638_HDR_zpse6e9fj8h.jpg

IMG_20140420_165003787_zpsukwyrwzq.jpg
IMG_20140420_170027129_zpsawmdazvf.jpg

Shradezz70S

What is the height of them? I am looking for a set that will clear roller rockers

real57vetteguy

The height is 2-3/4 which is slightly taller than stock. Clearance is really dependent upon what you are running. I just spoke with Mark Remmell (cutlassefi) to clarify this as he is VERY knowledgeable regarding this situation.
Mark stated "if the heads are stock heads there will be no issues"
If he is running Edelbrock or Procomp heads they should clear but if they don't all you need to do is pick up 1-3/4 BB Chevy studs and run a comp cams 1" poly lock"
Which changing studs and poly locks will be easier than running the enormous rocket, or mondello covers, especially if you have a heater box or power brakes.

real57vetteguy

PRICE REDUCED..... I need to make room for more covers... 250.00 SHIPPED!

Shradezz70S

Give me a day to get over to my storage I need to measure the height If it works I will take them.

z11375ss

I found running the Edelbrock heads that none of the old aftermarket valve covers would fit the roller rocker setup I have. I ended up putting cheap chrome ones on that look nice but I would much rather have used something like these which I have 2 or 3 sets of. Very, very, nice looking covers IMO.

Stevec

I'll trade you some polished M/T's for them!

z11375ss

Got those too!

real57vetteguy

The Holley valve covers have been sold.
I have several sets of Holley and M/T covers ready to be polished and painted to your specific needs

iam2fast4u86

Do any of the other ones have olds scripted into them?