Small block Aluminum intake
January 21st, 2014, 06:49 AM
#3
Registered User
Thread Starter
Join Date: Nov 2011
Posts: 659
I suppose there are some people left in the world that have never seen an Edelbrock manifold thats been made for 40--50 years and for those few, since I am not smart enough to post a pic here, just send me your email address and I'll dig out my camera and take a pic and send you. Sorry i am not as bright as some
February 20th, 2014, 04:43 PM
#8
Registered User
Thread Starter
Join Date: Nov 2011
Posts: 659
Well I sent pics, got shipping info, packaged it up, and all because someone on here said the money was on the way-----it still packed and once more for sale here.......Sorry my sales skills aren't up to every one heres standards.....Same deal same price. You pm me your email address and I'll send you the pics. Thanks for looking.
February 20th, 2014, 06:02 PM
#10
Registered User
Join Date: May 2011
Location: Delta BC Canada
Posts: 3,688
February 20th, 2014, 06:44 PM
#11
Registered User
Thread Starter
Join Date: Nov 2011
Posts: 659
I guess Dave can't read-----I'll send you a pic if you send me an email address-----as others have......and like I said, it is now boxed up......It says "Olds Performer 350" on it.
Check your PMs 24
Check your PMs 24
Last edited by ferndaleflyer; February 20th, 2014 at 06:57 PM.
February 20th, 2014, 07:12 PM
#12
Registered User
Join Date: May 2011
Location: Delta BC Canada
Posts: 3,688
last call
Finally!!!!!!! After eleven posts you FINALLY stated that the manifold is a Performer. Would it not have been easier for you just to go back to your original post & edit that to read that it was a performer? No in your world I have to wait for your pictures to figure out that it is an intake that I do not want.
FYI not only can I read I can also read between the lines.....and so can everyone else who has read this thread. We learned more about YOU in this thread than we did about your parts for sale.
Good luck with the sale of you intake.
February 21st, 2014, 06:53 AM
#15
Registered User
Join Date: May 2011
Location: Delta BC Canada
Posts: 3,688
more
You are wrong. All he had to do was identify the type of intake. A good sale transaction takes a reasonable & helpful seller as well as a genuine buyer.
February 21st, 2014, 10:03 AM
#19
Registered User
Join Date: Nov 2008
Location: Mass
Posts: 1,119
First sentence I asked a question. There is not right or wrong in asking a question.
Second statement is what someone who was truly interested in purchasing the part would have done.
Again ...... if the people posting had no intention of buying why are you all worked up over how he goes about selling?
If its inadequate he is only hurting himself.
If you were truly helpful why not ask him to email the photo to you and post it on his behalf?
If you arent helping you are bashing .....
February 21st, 2014, 10:14 AM
#21
Registered User
Join Date: Nov 2008
Location: Mass
Posts: 1,119
The intent in the above statement was to imply that i am illiterate.
Your statement about him was to suggest he actually is what you said he was like.
Dont think you are so clever that you if you dont specifically write it that you didnt mean it.
User Rules ......
5. No racist, homophobic, or misogynistic remarks, including derogatory slang, be it overt or covert, will be tolerated.
6. Be respectful.
9. If you are posting a new thread, do not use vulgarity in the title of the thread. Inside a thread, profanity will only be allowed if used in a controlled manner, and not directed at a particular forum member. Again, just try and be respectful of other forum members.
February 21st, 2014, 10:17 AM
#23
Banned
Join Date: Oct 2013
Location: Western Kentucky
Posts: 50
I can read and more importantly i understand intent.
The intent in the above statement was to imply that i am illiterate.
Your statement about him was to suggest he actually is what you said he was like.
Dont think you are so clever that you if you dont specifically write it that you didnt mean it.
User Rules ......
5. No racist, homophobic, or misogynistic remarks, including derogatory slang, be it overt or covert, will be tolerated.
6. Be respectful.
9. If you are posting a new thread, do not use vulgarity in the title of the thread. Inside a thread, profanity will only be allowed if used in a controlled manner, and not directed at a particular forum member. Again, just try and be respectful of other forum members.
The intent in the above statement was to imply that i am illiterate.
Your statement about him was to suggest he actually is what you said he was like.
Dont think you are so clever that you if you dont specifically write it that you didnt mean it.
User Rules ......
5. No racist, homophobic, or misogynistic remarks, including derogatory slang, be it overt or covert, will be tolerated.
6. Be respectful.
9. If you are posting a new thread, do not use vulgarity in the title of the thread. Inside a thread, profanity will only be allowed if used in a controlled manner, and not directed at a particular forum member. Again, just try and be respectful of other forum members.
February 21st, 2014, 10:17 AM
#24
Registered User
Join Date: Nov 2008
Location: Mass
Posts: 1,119
February 21st, 2014, 10:21 AM
#26
Registered User
Join Date: Nov 2008
Location: Mass
Posts: 1,119
February 21st, 2014, 10:26 AM
#27
Registered User
Join Date: Nov 2008
Location: Mass
Posts: 1,119
i am more than calm and i dont have to make excuses for my writings, nor do i have to back pedal and claim what i wrote is not what i meant.
my day is fantastic and will continue to be inspite of any attempt to make it otherwise.
i have more than proven my point here. you can continue on should you feel obligated to have the last word.
my day is fantastic and will continue to be inspite of any attempt to make it otherwise.
i have more than proven my point here. you can continue on should you feel obligated to have the last word.
February 21st, 2014, 10:51 AM
#28
Registered User
Join Date: May 2011
Location: Delta BC Canada
Posts: 3,688
How am i wrong?
First sentence I asked a question. There is not right or wrong in asking a question.
Second statement is what someone who was truly interested in purchasing the part would have done.
Again ...... if the people posting had no intention of buying why are you all worked up over how he goes about selling?
If its inadequate he is only hurting himself.
If you were truly helpful why not ask him to email the photo to you and post it on his behalf?
If you arent helping you are bashing .....
First sentence I asked a question. There is not right or wrong in asking a question.
Second statement is what someone who was truly interested in purchasing the part would have done.
Again ...... if the people posting had no intention of buying why are you all worked up over how he goes about selling?
If its inadequate he is only hurting himself.
If you were truly helpful why not ask him to email the photo to you and post it on his behalf?
If you arent helping you are bashing .....
You are wrong because none of this was about sending or about embedding pictures. This was about clearly identifying the model of Edelbrock intake that was for sale. The simple word PERFOMER would
have saved a lot of wasted time.
And your so called "good guy" clearly stated "I guess Dave can't read". So how does your Good Guy look to you now?. Please refer to your user rules listed below & evaluate. You did not like it when someone suggested you were illiterate how about someone telling me that I am illiterate? That is one nice guy!
Thread closed for me. There is a SBO performer for sale. If you need one $100 is a great price. Good luck to seller & potential buyers.
February 27th, 2014, 06:41 AM
#32
Banned
Join Date: Oct 2013
Location: Western Kentucky
Posts: 50
i am more than calm and i dont have to make excuses for my writings, nor do i have to back pedal and claim what i wrote is not what i meant.
My day is fantastic and will continue to be inspite of any attempt to make it otherwise.
I have more than proven my point here. You can continue on should you feel obligated to have the last word.
My day is fantastic and will continue to be inspite of any attempt to make it otherwise.
I have more than proven my point here. You can continue on should you feel obligated to have the last word.
ok
February 28th, 2014, 06:07 AM
#33
Registered User
Thread Starter
Join Date: Nov 2011
Posts: 659
Ok people I still have this manifold for sale. It is all boxed up for the guy that forgot to send the money in the first place and ready to go.....Says Oldsmobile Performer 350 on top and I believe it is a 3711 EGR model. $100 + the ride........
March 4th, 2014, 08:46 PM
#36
Rodney
Join Date: Jun 2011
Location: Houston, TX
Posts: 2,323
I'm interested in the manifold if it's a 2711. Are you sure it's a 3711?
