lemoldsnut

I can do fenders that need a small patch on the lower section behind the wheel. Steering wheels I can do but all will have a few cracks, No good trunk panels left at this time, I can do core front bumpers no driver grade or better at this time.

Thanks
Larry
lemoldsnut@aol.com
calls west coast time 8 am to 8 pm 541-815-4363

Tugla

Ok thanks for the update.

stanzaschance

Hello,I'm in need of 1966 oldsmobile 330 A/C brackets along with the nuts and bolts. Thanks!

lemoldsnut

I have a good chance of having one last set of AC compressor brackets, Do you have the pulleys and other brackets correct for AC?

Please contact me direct at lemoldsnut@aol.com These posts forward but can take a day or two and I don't always log onto this site and get the updates.

also please show your location?

Thanks
Larry

lemoldsnut

We also have the 65 Starfire for parts if any of you need stuff from it, just email or call.

I would consider trading parts for the following parts:

These are items I am looking for:
70 442 grills
70 442 sport mirrors
70-72 console type 4 speed shifter
type O 12 bolt 3:08-3:23 posi carrier
Type B 10 bolt 3:08-3:23 posi carrier
67 tach and gauges (tic-toc-tach)


thanks
Larry

lemoldsnut@aol.com
calls west coast time 8 am to 8 pm 541-815-4363

lemoldsnut

Updated the last list posting as of today. We recently built a new loft in our shop and we are working on getting parts better organized to make it easier to serve your needs.
JUST SOME OF THE CURRENT PARTS
WE BUILT A NEW LOFT IN MY SHOP AND PLAN TO GET MUCH MORE ORGANIZED OVER THE NEXT FEW MONTHS.

66 and 67 rust free frames.
One 67 convertible frame

Lots of suspension parts
67 442 headlight bezels
67 Cutlass 4 barrel air cleaner
66-67 442 manual trans air cleaner (top rechromed this is like new)
fenders 66-67 (no 66 442 fenders)
66-67 hardtop/convertible and post doors
69 hardtop/convertible right door
70-72 hardtop/convertible left door
67 custom louvered Cutlass hood
71-72 442 hood (the one with the chrome louvers)
66-67 trunk lids
67 442 headlight bezels good used (need some minor ding fix and polish to be nice)
67 Cutlass hood (very nice one)
66-67 quarters (only a left one currently)
67 core bumpers
66 core rear bumper
67 core supports
66-67 inner fenders
very solid 2 door hardtop roof off and ready mid A pillar to bottom of C pillar
66-67 AC parts
66 and 67 AC and Heater controls
Several rearends mostly 2:73 or 3:08 no posi's a few 12 bolt O type
66-67 Convertible crossmembers
66-67 convertible top
66-67 rear inner fenders
Floor sections
firewall sections
heater and AC dash boxes for cars with and without AC for inside and outside the firewall
Power and manual steering gears
brake parts
66 and 67 brake boosters
68 floor shift steering column
66,67,68 core steering wheels (cracked as always for refurbishing)
73-77 auto floor shifter
67 power bench seat track
66 & 67 Park brake ratchet assemblies
66-67 e brake light
brake drums (along with backing plates, spindles and boosters and so on)
Frame sections
66 bumper brackets
67 bumper brackets
some back up light parts
71 taillight assemblies
71 headlight bezels
66-67 hardtop 2 door power window regulators full set
70-72 vinyl top moldings
68 rosewood steering wheel had a couple of cracks that has been repaired. (not perfect but nice driver grade)
68 floor shift steering column
67 core door panels for trim
no dash parts sent them all to Ron Roth
67 Cutlass headlight bezels and housings
66 headlight bezels and housings
66 Cutlass Grills
67 Cutlass/F85/vista grills
71-72 442 hood The one with the two chrome grills very nice solid hood
67 Cutlass/vista Cruiser hood in very nice shape
67 Cutlass hood with custom louvers (not 442)
66 Cutlass body side trim
67 Cutlass Supreme/442 body side trim
66 headlight bezels
67 headlight bezels

66 442 sidewinder tach tested and working (would trade for a 70 ram air hood don't care if factory but must be metal framed)





engines:
68 350 short block running when pulled no knocking or smoke
77 403 long block lots of miles no other issues
67 330 320 Horsepower very nice runner
67 330 320 horsepower core just lots of miles no other issues
69 455 core don't know anything about was in a car I bought not running

Heads:
4A rebuilt in the bags never been run
#4 small block
big block heads: B (fresh), C, E, Ga, Ka, J

68-69 intake manifolds without cracks (almost never see that)
67 Toronado intake
66-67 442 intake
66-67 330 4 barrel intake manifold

69 Olds 98 LS sedan parting out, engine gone, this is a very high option car that I was able to drive and check most things out, options include: power trunk, AC, tilt tele column, power seat, power windows, power door locks, and on and on. very straight car with good rust free body panels

65 Starfire parts car, has power windows, power door locks, tilt floor shift column, 425, th400, power bucket seat, power trunk,


many 66-67 Cutlass and Cutlass Supreme body side moldings

67 taillight lens

66 bucket seats, passenger recliner passenger seat track and back missing, (both cores and need some springs, foam and upholstery)

67 drivers bucket seat core springs weak but complete seat

67 split bench seat (non-arm rest type)

Column shift auto parts

no dash parts all went to Ron Roth suggest you get with him for dash needs he is the 66-67 dash master (I only have a few pads left all have some cracking)

66-67 glass for 2 door hardtop, convertibles and post cars

66-67 back seats

66-67 window regulators hardtop, post and convertible

Lots of small pieces, like door hinges, wiring, trunk lights, brackets, pulleys, trim, door panel parts, interior trim pieces, and so on.

no 66 442 trunk moldings

I currently have 13 Oldsmobile cars, several 66-67 parts cars, and a 69 98 very high option parts car. I have had many others and I am working on getting my shop more organized to find stuff easier. Just email or call with what you need and I will check.

PARTS I AM LOOKING FOR (would consider trading for right parts)

70 W25 hood
Type O rearend posi carrier for 3:23 and also need 3:23 gears
70 442 grills
70 Cutlass 442 hockey stick hood chrome
70-72 maybe 68 and 69 as well drip rail moldings for A pillar
68-72 windshield moldings
70 console 4 speed shifter
67-70 O or P type 3:23 posi rearend or just a posi carrier




Email your needs or call

direct email: lemoldsnut@aol.com

calls west coast time 8 am to 8 pm except Sunday 541-815-4363

stanzaschance

Hello, I'm in need of 1966 olds a/c compressor brackets.If you have a set on I'd appreciate it. Thanks!

lemoldsnut

I am pretty sure I checked that for you a month or so ago. I haven't taken in any fresh AC cars since then. But hey you never know.

If I get one I will let you know.


Larry

lemoldsnut

Being the rainy day it is I decided to clean up some parts and get them labeled and put away. I am enjoying organizing for a change.

Here is some body side moldings for a 67 442/Cutlass Supreme, I have more these are just what I cleaned up today. Also a good hood latch for a 67 442.

Email me direct what your needs or questions are.

Thanks
Larry
lemoldsnut@aol.com

lemoldsnut

ttt

lemoldsnut

We will be cleaning up the shop area today. Time to make room. Having 15 Oldsmobiles its becoming a challenge for space. Over the next few days we will scrap out 3-5 of them. Sucks the price on scrap is so down but sometimes one has to make room. Those have been pretty parted on so no big loss. I suspect we will get them all in two trips. Sawzall will be a hummin today.

I think I have 4 67 cars with no floors, quarters, fenders, suspension, interior so time to clean them up and make room for the others.

Neighbors will appreciate it I am sure.

lemoldsnut

JUST TO UPDATE

LATEST ADDITIONS TO THE COLLECTION IS AS FOLLOWS:

1970 CUTLASS 2 DOOR POST (PARTS CAR)
1965 F85 2 DOOR POST V6 3 SPEED (PARTS CAR)
1970 442 NUMBERS CORRECT BUCKET SEAT AUTO AC (PROBABLY SELL WHOLE)
1995 98 V-6 4 DOOR FRONT END WRECKED (PARTS OR SELL WHOLE) CHEAP


CURRENTLY 15 OLDSMOBILES

EMAIL DIRECT FOR YOUR NEEDS. WE ARE GETTING READY FOR THE PORTLAND OREGON SWAP MEET REPORTEDLY THE SECOND LARGEST IN THE USA NOW

WE AS USUAL WILL HAVE 4 STALLS THERE. WE ARE TAKING ORDERS FOR PARTS TO BRING THERE.

EMAIL DIRECT IS lemoldsnut@aol.com
CALLS WEST COAST TIME 8 AM TO 8 PM 541-815-4363

THANKS
LARRY

bob provost

Looking for the glove box light switch and the chrome A/C vent that goes in the middle of the dash panel.

lemoldsnut

Bob,

Your name rings a bell but could just be my ding a ling alarm.

Email me direct with your needs and location. I am pretty sure I have what you need.

Thanks
Larry
lemoldsnut@aol.com

calls west coast time Mon-Sat 8 am to 8 pm 541-815-4363

lemoldsnut

We are back from the Portland Swap meet and trying to organize some. If you made a request or email in the past few weeks I did my best to get back to everyone while I was out of town. If I missed you or dropped the ball with you please contact me again. Sorry, just had so much go on the past month with the swap meet and a death in the family. Thanks for your patients with me.

Larry

If you have any needs email direct at lemoldsnut@aol.com or call 8 am to 8 pm all but Sunday then 1-5 west coast time 541-815-4363

lemoldsnut

Current inventory of parts car:

6 67 Olds Cutlass/442 2 door hardtop parts cars
3 66 Olds Cutlass/442 2 door hardtop parts cars
1-66 Olds Cutlass/442 2 door post parts car
1-67 Olds Cutlass/442 convertible parts car
1-65 Olds F85 2 door post parts car
1-65 Olds Starfire 2 door hardtop parts car
1 70 Olds Cutlass 2 door post parts car
1-95 Olds 98 4 door parts car

I have several engines for sale. Most are cores to rebuild. no 400 E blocks currently for sale. But do have a 350, 403, a few 330's, 2 425, and a 455.


I have also parted out many of these cars and have a shop full of parts. Email your needs or wants.

Nothing really rare, no 4 speed consoles, no ram air specific parts, no w-30 specific parts other than maybe an oil fill tube.

I have a 70 442 numbers match hardtop for sale. It is a total project but is mostly complete. I do have a thread with info on it.

Email direct for more information on what you need lemoldsnut@aol.com

or call west coast time 8 am to 8 pm 541-815-4363

Thanks
Larry

junkman005

Hey Larry and everyone else here i am new to the site , i have a 1965 cutlass that im debating on fixing up . i like the 67 cutlass supreme's better then this one but anyways was wondering about a 330 exhaust manifold for drivers side ? and seeing about a center console ? thanks for your time Eric

lemoldsnut

Pm sent

badblood50

hello Larry, need passenger side door for my 67 hardtop, can you help? if you can the cond .

lemoldsnut

PM sent.

Was gone most of the day email direct and it gets to my phone that way.

lemoldsnut@aol.com

Will be at a car show all day tomorrow but am sure I have one or two.

Thanks
Larry

calls west coast time 8 am to 8pm 541-815-4363

lemoldsnut

ttt

lemoldsnut

Just sorting through some parts and found the following parts:


67 442 trunk molding (the one that says OLDSMOBILE) SOLD
67 442 headlight bezels yes the right onesSOLD
67 442/Cutlass Supreme rear quarter lower trim with good mounting studs


Email direct for pictures and prices

lemoldsnut@aol.com

or calls west coast time 8 am to 8 pm 541-815-4363

Thanks
Larry

Roger60

Need a right roll-up door glass for a 65 Cutlass conv. Are they the same as 66-67?

lemoldsnut

According to Hollander interchange manual 65 Cutlass Convertible door glasses is only 65 GM A body so Skylark, Lemans, Chevelle and Cutlass and also convertible only per that manual

Sorry and thanks for asking

Larry

lemoldsnut

Just a note I was sorting through parts this morning and I do have two nice 67 core supports. One 66 that is very usable with some minor rust from the battery box. Some great 66 fender extensions as well.

I will take the time in the next week to get a updated list of parts.

Thanks
Larry

and as always just email direct at lemoldsnut@aol.com
or calls west coast time 8 am to 8 pm 541-815-4363

lemoldsnut

ttt

android 211

Need a decent 66 442 right taillight lense. Mine is faded to pink and cracked. Would be glad to give you pair of 66 Cutlass entire taillight assemblies, chrome is bad but lenses are dark red no cracks plus cash. Dont need the thin steel trim strip, got it still.

66-3X2 442

I may have a 66 442 r/lens if still interested. Contact me @ pchopesq@aol.com

Thanks

Mike

lemoldsnut

I was looking at trim parts for someone yesterday. I have most of the side trim for a 67 442/Cutlass Supreme 2 door hardtop I have only a few of the wheel well trim pieces left as they sell the fastest. But have many side stainless pieces and several back window trim pieces as well as the pinch weld trim for a convertible.

I also still have some 66 side trim

I also have a very rare and nice 66-67 442 fan shroud

Email or call with your needs direct email is best at lemoldsnut@aol.com

or calls west coast time 8 am to 8 pm 541-815-4363

Thanks
Larry

lemoldsnut

ttt

Bfg

Looking for a Z bracket for a 65 442. Any difference on a 66?

kjr442

1. Quote:

   Originally Posted by Bfg

   Looking for a Z bracket for a 65 442. Any difference on a 66?

" Z " Bracket ? What is this?

Koda

Clutch thingy.

Bfg

Z bar or equalizer for clutch rod

lemoldsnut

Closest I have is I have a 65 F85 with a V-6 and 3 speed trans has complete set up in it yet

Bfg

Ok, thank you.

lemoldsnut

The only two 65 cars I currently have are a 65 F85 2 door post car factory V6 and 3 on the tree, Most of the running gear still available all the rest pretty much gone, and a 65 Starfire factory 425 floor shift auto, tilt column, power windows, power locks, power seat, non-ac car seats, console, column, most of the body and engine left, rolling frame, trans, and bumpers sold as well as headlight assemblies and grill,

Good rust free body parts

email for questions
lemoldsnut@aol.com

Koda

Larry, if you had a 67 split bench front that the upholstery was shot but the chrome sides and nuts and latches were good, and the little bolt covers over the armrests were good and you wanted to strip all that off and send it my way, I'd pay for the seat in total. Parchment for preference.

Also would take a complete 67 jack assembly and wrench and a SS wheel spare nut if you got one.

lemoldsnut

Pm sent Koda,

Please use direct email lemoldsnut@aol.com

lemoldsnut

ttt