70 Cutlass complete parting out
#1
70 Cutlass complete parting out
I'm parting out a complete 1970 Cutlass. This car is a Pearl bucket seats, floor shift auto with console. The car has gone to the salvage yard.
Not many offers, so after hours of research this is what I've come up with:
PartPrice
Front Seats, Pearl, complete with headrests $400
Bucket seat floor brackets $30
Rear Seat50A/C duct work (under dash) $40
A/C compressor w/ brackets $50
A/C Unit box $80
A/C control (hole in 1 ****) $10
A/C Lines20A/C Condenser $50
Enigne harness $50
tail light harness rear $20
tail lights $20
tail lights backing (housing) $40
Side markers (4) $35
mirror (missing one screw) $20
carb (2 bbl) $10
overflow bottle & bracket $10
wiper motor $30
wiper blades $20
dome light wiring (missing cover) $5
steering column (floor shift non-tilt) $100
seat belts $120
center console (3 small screws in side to fix hinge) $150
center console floor bracket $30
dash pad & dash (uncut, nice shape) $150
map light $40
cigarrete lighter light $10
light switch $30
shifter $50
shifter linkage $20
door glass tinted (left & right each) $50
manual door window mechanism (left & right each) $25
1/4 glass tinted (left & right each) $50
manual 1/4 window mechanism (left & right each) $25
rear window tinted $100
clock $50
lower A/C went (attaches to the lower dash) $30
trunk latch $25
glove box door (with key) $35
steering shaft $35
door jam vents $10
horns $50
disk brakes assembly $200
speedo (floor shift) $50
Wheels SS III $100
All prices are for pickup, shipping extra.
Call Brandon @ 301-758-2542
Not many offers, so after hours of research this is what I've come up with:
PartPrice
Front Seats, Pearl, complete with headrests $400
Bucket seat floor brackets $30
Rear Seat50A/C duct work (under dash) $40
A/C compressor w/ brackets $50
A/C Unit box $80
A/C control (hole in 1 ****) $10
A/C Lines20A/C Condenser $50
Enigne harness $50
tail light harness rear $20
tail lights $20
tail lights backing (housing) $40
Side markers (4) $35
mirror (missing one screw) $20
carb (2 bbl) $10
overflow bottle & bracket $10
wiper motor $30
wiper blades $20
dome light wiring (missing cover) $5
steering column (floor shift non-tilt) $100
seat belts $120
center console (3 small screws in side to fix hinge) $150
center console floor bracket $30
dash pad & dash (uncut, nice shape) $150
map light $40
cigarrete lighter light $10
light switch $30
shifter $50
shifter linkage $20
door glass tinted (left & right each) $50
manual door window mechanism (left & right each) $25
1/4 glass tinted (left & right each) $50
manual 1/4 window mechanism (left & right each) $25
rear window tinted $100
clock $50
lower A/C went (attaches to the lower dash) $30
trunk latch $25
glove box door (with key) $35
steering shaft $35
door jam vents $10
horns $50
disk brakes assembly $200
speedo (floor shift) $50
Wheels SS III $100
All prices are for pickup, shipping extra.
Call Brandon @ 301-758-2542
Last edited by bkeese; March 20th, 2012 at 05:13 AM. Reason: Added prices
#10
I'm parting out a complete 1970 Cutlass. This car is a white bucket seats, floor shift auto with console. Everything will go and the rest to the salvage yard.
Tell me what you want, and make an offer. In the case of multiple offers for the same part, part will go to the highest offer when I say sold. Disassembly begins tomorrow. All parts not spoken for here will be placed on Ebay. So what do you need?
Make offers or request pictures here.
Tell me what you want, and make an offer. In the case of multiple offers for the same part, part will go to the highest offer when I say sold. Disassembly begins tomorrow. All parts not spoken for here will be placed on Ebay. So what do you need?
Make offers or request pictures here.
#23
Tell me what you want, and make an offer. In the case of multiple offers for the same part, part will go to the highest offer when I say sold.
Last edited by RATCHETMASTER; March 7th, 2012 at 06:44 PM.
#26
Ratchetmaster, I am the moderator in charge of the parts for sale section. I have no huge issues with this thread thus far.
HOWEVER..... I do not appreciate when people ask for offers from multiple people on one part. You are correct. This is not a bidding.
There should be a ball park price, and the deals should be completed in consecutive order from first to last.
If the first person who called dibs decides to pass, then it should be up for the next.
So..... everyone carry on for now. Be patient and most importantly, honest.
I just disassembled an entire car myself, and have 40 hours into all the work just taking the time to save everything possible for people.
Hard work should be rewarded, but not if it is conducted in a dishonest manner.
I thank the original poster for offering it up here first, before ebay, BUT bids ARE unacceptable on here.
HOWEVER..... I do not appreciate when people ask for offers from multiple people on one part. You are correct. This is not a bidding.
There should be a ball park price, and the deals should be completed in consecutive order from first to last.
If the first person who called dibs decides to pass, then it should be up for the next.
So..... everyone carry on for now. Be patient and most importantly, honest.
I just disassembled an entire car myself, and have 40 hours into all the work just taking the time to save everything possible for people.
Hard work should be rewarded, but not if it is conducted in a dishonest manner.
I thank the original poster for offering it up here first, before ebay, BUT bids ARE unacceptable on here.
#28
If it helps you can search for a mirror from a '70-'81 Camaro/Firebird. Its the same unit except for the mounting gasket, assuming you don't have a remote mirror.
#32
Ratchetmaster, I am the moderator in charge of the parts for sale section. I have no huge issues with this thread thus far.
HOWEVER..... I do not appreciate when people ask for offers from multiple people on one part. You are correct. This is not a bidding.
There should be a ball park price, and the deals should be completed in consecutive order from first to last.
If the first person who called dibs decides to pass, then it should be up for the next.
So..... everyone carry on for now. Be patient and most importantly, honest.
I just disassembled an entire car myself, and have 40 hours into all the work just taking the time to save everything possible for people.
Hard work should be rewarded, but not if it is conducted in a dishonest manner.
I thank the original poster for offering it up here first, before ebay, BUT bids ARE unacceptable on here.
HOWEVER..... I do not appreciate when people ask for offers from multiple people on one part. You are correct. This is not a bidding.
There should be a ball park price, and the deals should be completed in consecutive order from first to last.
If the first person who called dibs decides to pass, then it should be up for the next.
So..... everyone carry on for now. Be patient and most importantly, honest.
I just disassembled an entire car myself, and have 40 hours into all the work just taking the time to save everything possible for people.
Hard work should be rewarded, but not if it is conducted in a dishonest manner.
I thank the original poster for offering it up here first, before ebay, BUT bids ARE unacceptable on here.
Well, I'm not a parts dealer. My son just graduated from college in december and is cleaning up my junk and making the money. If I knew ball park prices I would include them, but I don't. So, I've spent hours researching and have NOT received a single offer, public or private.
What do I know so far.
Tilt floor shift columns $300-500 and $300 was a "give away".
Console $300-500
Shifter ?
Complete AC ?-$600
Bucket seats ?-$500 many just want the head rests, what up with that?
Floor shift speedo ?
Well I figured out that the column, console, shifter, seats and the AC are the big ticket items. The rest of it is noise. So what do you guys think is a fair price for the big ticket items? No bottom feeders please. The rest of the stuff will be priced based on how hard it is to remove. By next weekend the car will be in a scrap yard and we will move on to my CJ5 V8.
The reason I worded my thread the way I did was I wanted to encourage people to make legatimate offers after someone attempted to steal the part. I'm not promoting bidding just legit offers.
#33
#34
Prices have a LOT to do with condition.
Post pics and add descriptions to the items mentioned above. Then if you are afraid to start the price too low, start a bit high and go from there.
BTW . . . don't wait until the car is all apart until posting pics . . . take pics of the parts still on the car.
People NEED to see what you are offering. No one I know will be offering money for parts until they are seen unless it is for little stuff that condition does not affect price as much.
Just be realistic . . . don't expect top dollar for average parts or you may find them stored in your attic for years!!
ALL prices are subject to offers but you need to have a starting point.
Seats can go from $150 (good frames, with seat tracks) to $1000 for a set that has been completely rebuilt with foam, new vinyl, etc.
Obviously you can't expect to price out every piece. But like you mention in your post, the big stuff is the most important and therefore obviously needs prices.
Good luck on the sales.
Post pics and add descriptions to the items mentioned above. Then if you are afraid to start the price too low, start a bit high and go from there.
BTW . . . don't wait until the car is all apart until posting pics . . . take pics of the parts still on the car.
People NEED to see what you are offering. No one I know will be offering money for parts until they are seen unless it is for little stuff that condition does not affect price as much.
Just be realistic . . . don't expect top dollar for average parts or you may find them stored in your attic for years!!
ALL prices are subject to offers but you need to have a starting point.
Seats can go from $150 (good frames, with seat tracks) to $1000 for a set that has been completely rebuilt with foam, new vinyl, etc.
Obviously you can't expect to price out every piece. But like you mention in your post, the big stuff is the most important and therefore obviously needs prices.
Good luck on the sales.
Last edited by RATCHETMASTER; March 8th, 2012 at 08:22 PM.
#38
OK
The interior is Pearl, not White. The interior is out and pics will be posted today.
Quarter glass is out and pics will be posted today.
This car is rusty so no sheet metal parts.
Have stainless and door glass and rear glass that is tinted.
Thanks,
Bob
The interior is Pearl, not White. The interior is out and pics will be posted today.
Quarter glass is out and pics will be posted today.
This car is rusty so no sheet metal parts.
Have stainless and door glass and rear glass that is tinted.
Thanks,
Bob
#40
http://i360.photobucket.com/albums/oo44/hatterasbob/Blue%20Cutlass/DSCN0328.jpg
http://i360.photobucket.com/albums/o...s/DSCN0327.jpg
http://i360.photobucket.com/albums/o...s/DSCN0320.jpg
http://i360.photobucket.com/albums/o...s/DSCN0329.jpg
http://i360.photobucket.com/albums/o...s/DSCN0325.jpg
http://i360.photobucket.com/albums/o...s/DSCN0326.jpg
http://i360.photobucket.com/albums/o...s/DSCN0324.jpg
http://i360.photobucket.com/albums/o...s/DSCN0327.jpg
http://i360.photobucket.com/albums/o...s/DSCN0320.jpg
http://i360.photobucket.com/albums/o...s/DSCN0329.jpg
http://i360.photobucket.com/albums/o...s/DSCN0325.jpg
http://i360.photobucket.com/albums/o...s/DSCN0326.jpg
http://i360.photobucket.com/albums/o...s/DSCN0324.jpg