2blu442

I think I've got an extra single #5 head, but will have to check for sure.

John

smcfall

Would you happen to have a 68 radiator core support

2blu442

Yes I do. Are you located on the West Coast, or near there? If so PM me your shipping address and I'll get an estimate for you. If your on the East Coast, or in Canada you can probably get one closer. If your not close to me then I'd encourage you to create a parts wanted thread and include your location. John

smcfall

2blu442 i posted the wrong year i need a 68 And im in Kansas

2blu442

OK, I've got a 1968 too. Was yours damaged in an accident, or just rotted out under the battery box? John

smcfall

I bought the car and it has a 72 radiator core support with 72 headlights and 72 bumper. The bumper doesnt fit right. The also had to cut the grill pieces of the 72 so the hood would shut so trying to get the support so i can put the correct lights back in it get a new bumper thatfits that year and a grill that fits that year. also do you have pics and my email is shawnmcfall@***.net

2blu442

email sent.

Neil Miller

Looking for the exhaust crossover for my 64 F85 wagon with a 330ci and a 4 speed. Doesn't need to be in NOS condition just usable because I'm not sure what direction I'm going with the car (stock/modified) but it's really to noisy right now.

2blu442

So you need the exhaust pipe that runs from the drivers side, under the engine, and connects to the passengerside manifold. Yes I've got several of those in useable condition. I'll dig one out and get pictures for you Saturday.

You say its really loud, you've confirmed its holes in the pipe vs leaky manifolds?

John

Neil Miller

The pipe is gone completely but the exhaust going to the back of the car is there hence it has open manifolds

2blu442

Max, I see you deleted your post. Have you found the head you needed? If not I came up with one, but would like to have it hot tanked and magged to make sure its crack free. Let me know. John

maximino.torres

Thank you for the response. Don't dig just yet. I think I found something in my area. I will follow up with you if it doesn't turn out. Thanks again.

2blu442

Hi Neil
Here's two for you to consider. The first has pits but looks solid still, price $15 plus shipping. The photo looks like there may be holes through, but that's oil I got off the engine. The second one is fairly new, some surface rust and small dents but I don't think there are any pits, $30 plus shipping. I've held them up to a 1966 330 engine and they both fit fine. Let me know what you think, if you want one of them send me a PM or email with your address and I'll get shipping costs for you. John

DSCN7519.jpg

DSCN7523.jpg

maximino.torres

I believe I found one in my area. Thank you for your time and response. I will get back with you if it doesn't work out.

rockocwmii

I am looking for the upper drivers side window trim piece for the front glass. Have a 75 cutlass Rocky 501-242-3291

2blu442

Rocky, do you see the piece in any of these pictures?

DSCN5973.jpg

DSCN5975.jpg

DSCN5976.jpg

coppertopgmc

Do you still have any 15" ssII or ssIII wheels also looking for chrome trim 71 Cutlass Supreme RH just in front of rear wheel 2dr

Alex72cutty

Do you have a alternator bracket for a 64 cutlass with the original motor?

2blu442

Not sure, is this for an AC or Non-AC car?

John

lass4ken

Do you have driver door panel and a set of visors (color does not matter) that fit a 64 cutlass convertible? Thanks!
Ken

2blu442

Hi Ken
I'm sure I don't have a good door panel. But I may have the visors. I'll look, but if you don't hear from me in a week or so please send me a reminder. John

Alex72cutty

It's a A/C car. How far are you from Austin?

lass4ken

John, the door panel does not have to be perfect, just so the top curved metal is not rusted, and the panel is not warped. I will be recovering it. Don't need armrest, window crank handle, etc...
Thanks for your help! Ken

69Postss

John,
Just checking to see if you have the following:
driver's side metal inner fender for a '67 Cutlass.

Thks, RP

The Flash

would you have
rear swaybar for a 1966 98?
or a windshield wiper reservoir

2blu442

Sorry guys, I hadn't seen the new posts.

Flash, sorry I don't have a sway bar. I may have a wiper reservoir.

69Postss, yes I've got some 1967 metal inner fender liners. If your still looking send me a PM or email.

Russell Winkle

Needing doors.
trunk lid.
rear body panel.

shipping to 28590.

2blu442

I've got some doors, I think I've got a convertible trunk lid. What part of the rear body are you needing? I'll look to see what I have and take some pictures for you. John

1973hurst

Looking for some C type rebuild able heads.

Thanks,
Craig

2blu442

Hello Craig
Yes, I've got some extra C heads. Shipping can be expensive if your far away. What part of the country/world are you located in? If you would send me a PM or email with your location I can send you some photos, give you a price and include a shipping estimate. John

calibones

How about some trim trim for a 73 delta 88?

Best,

-Will

Harp 1

Calibones, I bought my trim for my 75 Delta on-line. The website is www.trim-gard.com Many combinations/colors/chrome tips etc. They will be put on this week before a car show i'm going to next Sunday. Good luck Matt

midnightleadfoot

1975 cutlass heater/ac radio dash panel?

calibones

Thanks Matt! ended up finding a piece from another manufacturer I like searching for a trim-gard distributor

http://cowlesproducts.com/oldcontent...m/chrome-trim/

http://shop.cowlesproducts.com/c/pro...77.1079884.0.0

hectoralex

Hi, I'm looking for side view mirrors for a 1968 Cutlass convertible. I'm also looking for the rear side markers with logo, the convertible package tray, and the convertible tonneau cover. If possible, the air cleaner for this model year. This engine has the 4 barrel carb, with electronic ignition, and might be a non-original 455.

Your help is appreciated.

Zip code is 79903, El Paso TX.

mjsolds

Hello Im looking for front and back black interior door panels for a 67 cutlass. I'm open to f-85, cutlass or cutlass supreme in decent condition.

Thanks for your help,

Matt

Ptbsjb

I'm restoring a 1965 f85 wagon and need front and rear bumpers. Do you have any by chance? Thanks

2blu442

Sorry guys, I've not seen this thread lately.

Will, I don't have the trim you need.

midnightledfoot, I should have the 1975 radio panel. If your still needing it please send me a PM or email.

hector, I don't have any convertible specific parts, but should have several other items you listed. If your still needing these parts send me a PM or email.

Matt, not sure if I have any usable door panels. If your still needing them please send me a PM or email, then I'll dig around to see what I can find.

Ptbsjb, the front bumper should interchange with other Cutlass/f85 models. I should have a solid core or possibly driver quality one. But the rear bumper is wagon specific. I don't have one of those and it will be hard to find. If you haven't created a parts wanted thread I'd encourage you to give that a try.

John

streetrod

Looking for a set of 64 back up lights.

fast eddie

I somehow managed to lose all of the bolts that hold the A/C compressor and brackets. Just need the bolts. Do you have these laying around? PM me with price + shipping to 80015. Thanks, Ed.