Pewter442

So we are getting g the rallye series seat foams for TMI and they have rallye series for the front bench seat but they don't me one for the rear seat. I'm thinking of having my interior guy build up the foam on the rear seat to look like the picture below. What do you guys think.

67_-chevelle-sport-bench_zpsnwao6sku.jpg

lemoldsnut

It is nice being as there was only two seat belts back there too. However, it means two only sit back there.

It is your car make it what you want

Larry

Pewter442

Very true. We were just thinking because the fronts will bolstered that the rear would look good also. Just wanted some more opinions.

Pewter442

So I just realized the rear seat back we have is not correct. The issue I'm having is that the loops the the bolt goes through to bolt the seat in is about an inch inward. The loops are not even close to being in the right spot. I'm thinking the seat back is for a 68-72 but not positive. Does anyone have a picture of there rear seat back in and the mounting loops in. Just for visual reference.

2Olds4U

This any help to you Pewter? You can see that the tabs are way more than an inch in. From a 67 HT.

Pewter442

Yeah that does help. It also helps to have the correct seats. Yesterday I went to my local guy to source some seats and I pulled some seats of one of the 67 cutlass ' s he has and what I have is 100% incorrect. The old timer who only deals in GM stuff didn't even recognize what I had. So I picked up the seat bottom and back for $100 and just gave him what I had. I'm so glad I dry fitted the seats before I took it in to get reupholstered.