firefrost gold

going to spruce up my trunk getting a matching spare tire and a new mat. was looking at fusicks they have a liner that goes on the back of the rear seat was that a stock part that I'm missing or ?

rcorrigan5

Are you talking about the trunk divider panel (TDC682) and insulation (TDC6821)? Both my '68 4-4-2 convertible and the '69 4-4-2 convertible have that divider panel, except that it is made of a very flimsy cardboard that I suspect might disintegrate over time. Mine were still usable and I used the original on my '68 ("69 still in progress). But the panels offered by Fusick are more substantial and probably more effective.

Randy C.

firefrost gold

yes thats the part mine is missing . is that a everyone sells the same thing or is there a good beter best one ?

rcorrigan5

I don't know the answer to your question but I do know that Fusick is tops when it comes to parts quality. I got a lot of my restoration parts from them and was pleased with everything. They are good!

Randy C.

firefrost gold

so how do they attach ?

mrolds69

Everybody sells the same, they are REM. 'Verts and coupes are different numbers. You punch out slots and it hangs on the 2 hooks you back seat hangs on. You can add glue if you want, but it is not needed.

firefrost gold

do the slots come perforated or do I have to cut them photos would be nice . I have two old speakers to take out too will leave the grills . The original owner had a reverb i it at one time he thought I did remove the trailer wiring also .

mrolds69

From memory...the slots are definitely perf'ed, I can't remember if there are multi ap perfs or not. You don't have to cut them.

firefrost gold

Thanks guys I seen some speaker clips to. The original owner did the upgrade to the am raidio to have back speakers but ran the wire himself not the best job little black tape and some Funky bolts to hold in the 5" round aftermarket speakers I will clean that up re clip the wires and new backer , new matching spare and one of the black mats should be nice. I will post some photos when done.

firefrost gold

Trunk mats ?? I ordered a Mat From ILT they said it was a Two piece correct mat it is nothing like the stock one it is thin mostly rubber and by the REM company any tips on who to order from or buy from that is a better product .

RROLDSX

I got my REM mat from Fusicks, same thing, I don't think it looks anything like stock. I am going from memory so I could be mistaken.

mrolds69

I think, like the trunk separator, REM is the only game in town for the mat. They have made 2 or 3 different styles over the last 15 or 20 years. The current one is as close as they have made yet. The one before that was like fiberglass with threads running through it, ugly and hard to maintain. I don't know what ILT is selling, but it sounds like the most recent model. None are exactly like originals.

firefrost gold

Some one was telling me the one they sold was a thick correct one that "DID NOT" get marked down at the Olds nationals in the judging unlike most out there . I just can't remember who it was .I have a e mail in to Ron Memmer . I did get one of the large black mats for the trunck and could cover the old mat with that do not know what would be better
and less frowned on . LOL

firefrost gold

here are a couple of photos of what i have