Problems with gauges

sama87 · 09-08-2007, 06:48 PM

I have an 1985 Toronado with digital gauges. The speedometer works sometimes, but sometimes it doesn't. The gas gauge and the coolant gauge also stop working, but much less often. What should I check? Some have told me it may be the wiring. If thats a likely case, does anyone know where I can get a kit with everything I need to rewire the car, including detailed instructions? Thanks in advance!

ozoneblue · 09-09-2007, 06:04 AM

Try removing the cluster & cleaning the plug at the printed circuit.Also try bending the tabs on the plug to make them fit tighter. Disconnect battery first! Use rubbing alcohol to clean with.I have also used a hot glue gun to refill the screw holes that split crack & strip out.as they hold the cluster tight.

Olds64 · 09-09-2007, 08:09 AM

Your problem probably isn't the wiring. Check the connections and fittings like Ozoneblue said. If you want to consider an aftermarket wiring harness check out the following website.

http://www.painlessperformance.com/webcatalog

sama87 · 11-04-2007, 09:55 PM

You were right, it is the connections in the back. I havent gotten around to fixing it yet, but when they act up all I have to do is hit the dash. Thanks for your help guys!

09-08-2007, 06:48 PM	#1 (permalink)
sama87 Junior Member Join Date: Sep 2007 Posts: 4	Problems with gauges I have an 1985 Toronado with digital gauges. The speedometer works sometimes, but sometimes it doesn't. The gas gauge and the coolant gauge also stop working, but much less often. What should I check? Some have told me it may be the wiring. If thats a likely case, does anyone know where I can get a kit with everything I need to rewire the car, including detailed instructions? Thanks in advance!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rally Pack Gauges?	Omicron	Interior/Upholstery	13	02-21-2008 07:36 PM
Factory Tach Gauges - What Is Involved - What Do I Need To Do?	Gary C	Cutlass	3	09-17-2007 06:53 PM
1986 tach gauges dashboard	slipbakka	Cutlass	1	05-08-2007 03:21 AM
Aftermarket Gauges and Dash??	ct1979	Interior/Upholstery	0	01-09-2007 09:17 PM
aftermarket gauges swap within the factory dash of a '68 Cutlass?	skibone	Interior/Upholstery	0	04-15-2004 03:13 AM

09-09-2007, 06:04 AM	#2 (permalink)
ozoneblue Senior Member Join Date: Jun 2006 Posts: 404	Try removing the cluster & cleaning the plug at the printed circuit.Also try bending the tabs on the plug to make them fit tighter. Disconnect battery first! Use rubbing alcohol to clean with.I have also used a hot glue gun to refill the screw holes that split crack & strip out.as they hold the cluster tight.

09-09-2007, 08:09 AM	#3 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,242	Your problem probably isn't the wiring. Check the connections and fittings like Ozoneblue said. If you want to consider an aftermarket wiring harness check out the following website. http://www.painlessperformance.com/webcatalog

11-04-2007, 09:55 PM	#4 (permalink)
sama87 Junior Member Join Date: Sep 2007 Posts: 4	You were right, it is the connections in the back. I havent gotten around to fixing it yet, but when they act up all I have to do is hit the dash. Thanks for your help guys!