Dropped spindles for a 1953 Olds?

Alocatelli · 08-24-2007, 10:21 PM

I am looking for some 2" dropped spindles for my '53 Olds Super 88. I thought at one point several companies made them but can't remember which. These are for the stock front end. If anyone knows a source I would appreciate it. Thanks.

59-59-59 · 08-31-2007, 09:20 PM

I can see the advertisement for the company that does them.. They advertise in Rod and Custom and I T H I N K they are called Fatman??

88 coupe · 08-31-2007, 10:46 PM

http://www.hotrodsworldwide.com/catalogs/fat-man.htm

Norm

Olds64 · 09-01-2007, 04:11 AM

I don't know what type of look you are going for, but I always thought it would be cool to put an adjustable air bag suspension into my 64 98. I haven't don't much research into this but I recall the company name Fatman as well. Either way, I think your car will look sweet with a little bit of drop to it. Whether you do it with drop spindles or airbags.

Tedd Thompson · 09-01-2007, 12:48 PM

I dropped my 55 convertible just by putting 60 series tires on it. This took it down about 1-3/4" and is easy to put back to stock if you decide to later. I lowered front and rear, but it would work on just the front also.

Good luck.

Tedd

Alocatelli · 09-03-2007, 02:05 PM

Thanks for the info, I thought Fatman may make a spindle but couldn't remember. I actually just got done installing a full Air Ride airbag system on the Olds. I am looking for the spindle so that I can get a little more drop out of the front and also help correct the camber when the car is riding lower. I already used 2" lowering blocks in the rear in addition to the airbags so the 2" spindle in the front will help even everything out.

08-24-2007, 10:21 PM	#1 (permalink)
Alocatelli Junior Member Join Date: Jul 2007 Posts: 15	Dropped spindles for a 1953 Olds? I am looking for some 2" dropped spindles for my '53 Olds Super 88. I thought at one point several companies made them but can't remember which. These are for the stock front end. If anyone knows a source I would appreciate it. Thanks.

09-01-2007, 12:48 PM	#5 (permalink)
Tedd Thompson Junior Member Join Date: Oct 2004 Location: Forest Ranch Ca. Posts: 15	Dropped Spindles I dropped my 55 convertible just by putting 60 series tires on it. This took it down about 1-3/4" and is easy to put back to stock if you decide to later. I lowered front and rear, but it would work on just the front also. Good luck. Tedd

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Windshield and door glass interchangeability on 1953 Olds 88	Alocatelli	Chassis/Body/Frame	2	07-24-2007 09:17 PM
looking for 59-60 spindles, and...	kustom60dynamic_rick	Parts Wanted	1	06-29-2007 06:07 AM
exterior visor for a 1953 Olds 98	tarps3	Chassis/Body/Frame	1	02-16-2007 06:53 AM
Looking for a 1953 Olds 88	nonpro	Chassis/Body/Frame	0	01-18-2007 11:04 AM
1953 olds rocket 88	jim braith	Cars For Sale	2	01-02-2005 05:46 PM

08-31-2007, 09:20 PM	#2 (permalink)
59-59-59 Senior Member Join Date: Sep 2006 Posts: 196	I can see the advertisement for the company that does them.. They advertise in Rod and Custom and I T H I N K they are called Fatman??

09-01-2007, 04:11 AM	#4 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,531	I don't know what type of look you are going for, but I always thought it would be cool to put an adjustable air bag suspension into my 64 98. I haven't don't much research into this but I recall the company name Fatman as well. Either way, I think your car will look sweet with a little bit of drop to it. Whether you do it with drop spindles or airbags.

09-03-2007, 02:05 PM	#6 (permalink)
Alocatelli Junior Member Join Date: Jul 2007 Posts: 15	Thanks for the info, I thought Fatman may make a spindle but couldn't remember. I actually just got done installing a full Air Ride airbag system on the Olds. I am looking for the spindle so that I can get a little more drop out of the front and also help correct the camber when the car is riding lower. I already used 2" lowering blocks in the rear in addition to the airbags so the 2" spindle in the front will help even everything out.