1964 Cutlass Antenna

64Todd · June 12th, 2007, 06:04 PM

Anyone know how to get at the antenna on the passenger front fender? Mine needs replacing....

Will removing the cowl do the trick? Or will the fender need to come off?

MarkR · December 11th, 2008, 02:27 PM

Did you ever figure it out? I have same question on '66 Cutlass

joe_padavano · December 11th, 2008, 05:05 PM

You should be able to unscrew the bezel on the outside of the fender, allowing the body of the antenna to be pulled out from the underside of the fender.

December 12th, 2008, 10:15 AM

I stripped out some 63 64 buicks last year and there is a panel under the wheel well has to come off ,to access the hold down for lower part of antenna ,once top and lower are unfastened it pulled out the hole in fender well . Not sure if cutlass is the same .

roc wal
Dan B

65cutty · December 18th, 2008, 08:43 AM

I had to unbolt the bottom mount and pull out the fender to reomve mine, the little screw on the brkt isnt fun but that way saves scratching anything.

June 12th, 2007, 06:04 PM	#1 (permalink)
64Todd Junior Member Join Date: May 2007 Location: Los Angeles Posts: 2	1964 Cutlass Antenna Anyone know how to get at the antenna on the passenger front fender? Mine needs replacing.... Will removing the cowl do the trick? Or will the fender need to come off?

December 11th, 2008, 05:05 PM	#3 (permalink)
joe_padavano Super Moderator Join Date: Mar 2007 Location: Northern VA Posts: 4,398	You should be able to unscrew the bezel on the outside of the fender, allowing the body of the antenna to be pulled out from the underside of the fender. __________________ Joe Padavano 64 Jetstar 88 Conv 66 442 L-69 Conv 68 W-30 69 H/O 69 442 70 W-30 72 442 84 Custom Cruiser 86 Caprice wagon (w/307 Olds)

December 12th, 2008, 10:15 AM	#4 (permalink)
rocwal Guest Posts: n/a	63 64 cutlass antenna I stripped out some 63 64 buicks last year and there is a panel under the wheel well has to come off ,to access the hold down for lower part of antenna ,once top and lower are unfastened it pulled out the hole in fender well . Not sure if cutlass is the same . roc wal Dan B

December 18th, 2008, 08:43 AM	#5 (permalink)
65cutty Registered User Join Date: Aug 2008 Location: westerville ohio Posts: 176	I had to unbolt the bottom mount and pull out the fender to reomve mine, the little screw on the brkt isnt fun but that way saves scratching anything. __________________ jim

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

December 11th, 2008, 02:27 PM	#2 (permalink)
MarkR Registered User Join Date: Oct 2008 Location: Denver Posts: 7	Did you ever figure it out? I have same question on '66 Cutlass