alignment

projectheaven · 01-26-2008, 03:50 PM

Hello,
I have what's called toe in with my front wheels.I heard that I can place shims between the upper a arms to adjust this.Does anybody know if this is correct? Or at least know the correct way to do it?

rocketraider · 01-26-2008, 04:51 PM

Toe is adjusted with the tierod ends. You need some toe-in because as the car travels forward, the front wheels will bow outward on the spindle's axis and cause 1) squirrelly handling and 2) rapid and excessive tire wear if toe is not set correctly.

Caster and camber are adjusted by shimming the upper A-arms, to angle the top of the wheel in or out from centerline. I suggest you take the car to a good front-end alignment shop if you're unsure about it. Preferably one that has some experience with dubs, since with bigger wheels/tires, factory specs are probably not even relevant.

projectheaven · 01-26-2008, 05:01 PM

That makes a ton of sense.I think I'll take it to a alignment shop to be on the safe side.Thank you for your help.

01-26-2008, 03:50 PM	#1 (permalink)
projectheaven Senior Member Join Date: Dec 2007 Location: The bay area Posts: 100	alignment Hello, I have what's called toe in with my front wheels.I heard that I can place shims between the upper a arms to adjust this.Does anybody know if this is correct? Or at least know the correct way to do it? __________________

01-26-2008, 04:51 PM	#2 (permalink)
rocketraider Oldsdruid Join Date: Dec 2007 Location: Danville Vajenya, the Last Capital of Dixie Posts: 252	Toe is adjusted with the tierod ends. You need some toe-in because as the car travels forward, the front wheels will bow outward on the spindle's axis and cause 1) squirrelly handling and 2) rapid and excessive tire wear if toe is not set correctly. Caster and camber are adjusted by shimming the upper A-arms, to angle the top of the wheel in or out from centerline. I suggest you take the car to a good front-end alignment shop if you're unsure about it. Preferably one that has some experience with dubs, since with bigger wheels/tires, factory specs are probably not even relevant. __________________ I know absolutely nothing about Oldsmobiles. Just ask the owner of Oldspower.com

01-26-2008, 05:01 PM	#3 (permalink)
projectheaven Senior Member Join Date: Dec 2007 Location: The bay area Posts: 100	That makes a ton of sense.I think I'll take it to a alignment shop to be on the safe side.Thank you for your help. __________________

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode