converting

72 Delta 88 · 07-27-2002, 04:12 PM

My wife thinks I'm nuts, but I'm trying to save my '72 delta 88 from the junkyard. I'm trying to take this car that has too much undercarriage rust to fix and slavage as many parts as I can. I found a '72 delta 88 and was looking for some answers about transfering parts. Is the header panel, (head lights, parking lights, grill and bumber), interchangable from '72 to '74. Also looking to change the tail lights and rear bumber, as well as the dashboard. I guess I'm looking to convert a '74 back to a '72. Can any one tell me if these conversions are possible, I have found a '74 but haven't purchased it yet until I knew it could work.

Thanks in advance for any help,

72 Delta 88

Edsdelta · 07-28-2002, 11:23 AM

You may be suprised to see the differences between the 2 years as far as body design. I know my 66 Delta woudn't match up to

Edsdelta · 07-28-2002, 11:24 AM

.. to a 68 Delta at all.

My best advice would be to mesure some of the bolt patterns on the parts you want to switch over. If they come close, then go for it. If they're not even close, then you're looking at a lot of work.

Ed

Edsdelta · 07-28-2002, 07:32 PM

Martine, check this out.. it's the radio you've been looking for!

EBAY

biguke2001 · 08-30-2002, 07:30 AM

I have a '71 olds 88 Custom sedan with a 455 2-barrel. I have found that 1971 -1973 fenders, headers, and hoods are interchangeable. Some trim features didn't follow, but bolts right up. In 1973 the bumpers changed, so did fillers, etc.. 1974 moved side markers around. 1975-1976 more changes in fillers and trim.

Headers off olds 98 will exchange easy too, using the same years as above. Pay attention to the hood as these may vary, but fenders are no problem.

Dash parts switch too.

I have a 1976 98 too, and have been hunting for parts.

good luck!!!

martine · 09-02-2002, 08:49 PM

ed.good looking out.i lost the bid on that one.but have since won two am radios.but still looking for the am/fm 66 models.my prizes was both 65.thanks!!!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oai vacuum hose instalation 1970 442	chevelle_ss	442	0	02-01-2007 08:31 AM
For Sale: 1975 Toronado Custom 455 Olds	Charger1973	Cars For Sale	5	01-10-2007 01:02 AM

07-27-2002, 04:12 PM	#1 (permalink)
72 Delta 88 Junior Member Join Date: Jul 2002 Posts: 1	My wife thinks I'm nuts, but I'm trying to save my '72 delta 88 from the junkyard. I'm trying to take this car that has too much undercarriage rust to fix and slavage as many parts as I can. I found a '72 delta 88 and was looking for some answers about transfering parts. Is the header panel, (head lights, parking lights, grill and bumber), interchangable from '72 to '74. Also looking to change the tail lights and rear bumber, as well as the dashboard. I guess I'm looking to convert a '74 back to a '72. Can any one tell me if these conversions are possible, I have found a '74 but haven't purchased it yet until I knew it could work. Thanks in advance for any help, 72 Delta 88

07-28-2002, 11:23 AM	#2 (permalink)
Edsdelta Member Join Date: Dec 2001 Location: Maine, USA Posts: 89	You may be suprised to see the differences between the 2 years as far as body design. I know my 66 Delta woudn't match up to

07-28-2002, 11:24 AM	#3 (permalink)
Edsdelta Member Join Date: Dec 2001 Location: Maine, USA Posts: 89	.. to a 68 Delta at all. My best advice would be to mesure some of the bolt patterns on the parts you want to switch over. If they come close, then go for it. If they're not even close, then you're looking at a lot of work. Ed

07-28-2002, 07:32 PM	#4 (permalink)
Edsdelta Member Join Date: Dec 2001 Location: Maine, USA Posts: 89	Martine, check this out.. it's the radio you've been looking for! EBAY

08-30-2002, 07:30 AM	#5 (permalink)
biguke2001 Junior Member Join Date: Aug 2002 Location: cleveland, ohio Posts: 2	I have a '71 olds 88 Custom sedan with a 455 2-barrel. I have found that 1971 -1973 fenders, headers, and hoods are interchangeable. Some trim features didn't follow, but bolts right up. In 1973 the bumpers changed, so did fillers, etc.. 1974 moved side markers around. 1975-1976 more changes in fillers and trim. Headers off olds 98 will exchange easy too, using the same years as above. Pay attention to the hood as these may vary, but fenders are no problem. Dash parts switch too. I have a 1976 98 too, and have been hunting for parts. good luck!!!

09-02-2002, 08:49 PM	#6 (permalink)
martine Member Join Date: Apr 2002 Posts: 36	ed.good looking out.i lost the bid on that one.but have since won two am radios.but still looking for the am/fm 66 models.my prizes was both 65.thanks!!!!