chevy 454

72droptop · 12-19-2007, 08:55 PM

i was wondering are there any special motor mounts that i woulld need to install a 454 in 72 cutlass convertible. also is it a good idea to do this? its going to be a total rebuild with the stroker crank

Oldsguy · 12-20-2007, 04:25 AM

I don't think it would be a good idea, the Cutlass deserves an Olds engine.

and I don't know anything about chevy engines except they are orange.

88 coupe · 12-20-2007, 04:41 AM

The people at http://www.chevelles.com/forums/ will be happy to answer all your questions about Chev engines.

Norm

Olds64 · 12-20-2007, 05:12 AM

I don't think it would be a good idea. Chevy engines need 4 bolt mains because the blocks are cast out of hardened toothpaste (you know, like the toothpaste on the edge of the sink in the evening). It isn't a good idea to use them. They usualy blow headgaskets at about 4:1 compression. The hi compression engines are 5:1.

72droptop · 12-20-2007, 11:56 AM

thanks how would i build a kick @ss 455 or the 350 rockets that already installed i really want a stroker and would the 400 turbo transmission from chevy work thanks or the

Olds64 · 12-20-2007, 01:42 PM

Well, there is alot of advice here on how to build a hi performance 455 or 350. If you build an Olds engine you probably won't build a stroker. That is mostly a Chevy phenomenon. Why would you want to build a stroker when you can buy a 455 which already has a long stroke and makes more torque than you can shake a stick at? BTW, a Chevy TH 400 will NOT bolt up to an Oldsmobile engine.

Redog · 12-20-2007, 01:46 PM

The 400 tranny will work, but you'll need an adapter plate to hook it up to the motor. BPO have a differnet bolt pattern than Chevys

Get a good 350 or 455 (350, 395558 "2" block from 68 to 72 cast iron and soild mains, maybe somebody else can shead light on the best 455) and basicly a good cam, lifters, decent manifold, decent ign, good heads (stock 5 or 7a for small blocks and C for the big block) and a set of headers and you'll have a pretty decent streetalbe motor. Just be sure to get good cooling, and a deeper oil pan would be a good idea too!

72droptop · 12-21-2007, 11:12 AM

thanks for the info. it's not cool to be the dumb one, but with guys like you all, that got my back, it's kinda Ok.

Oldsguy · 12-21-2007, 11:15 AM

No, I wouldn't say the dumb one. It is all relative, there is always someone, someplace that knows more than me, or you, or (fill in the blank). We just like our Oldsmobiles.

72droptop · 12-21-2007, 11:25 AM

found a big block. the casting numbers are 396021F out of a 1975 olds. is ths a good block to rebuild

88 coupe · 12-21-2007, 12:14 PM

Quote:

Originally Posted by 72droptop

........ is this a good block to rebuild?

They are all good.

Norm

z11375ss · 12-22-2007, 09:40 PM

I've had both engines and liked the Olds better. Stump pulling torque opposed to needing to rev high to produce power. Small blocks are different though. I like my 71 LT1 Vette, it screams!

66 Holiday 461 · 12-23-2007, 04:52 AM

You are only the dumb one if you stick a cheby in your Olds. The car would never recover from the shame.

Olds64 · 12-23-2007, 05:56 AM

Yeah, I think it would be a bad case of automotive suicide. The car would probably just give up.

GoodOldsGuy · 12-25-2007, 05:19 PM

Use the 455 engine, mild cam, headers, Torker intake coupled with a Turbo 400 trans 12 bolt Olds with 3:42 gear and you will have a fast and reliable street machine with gobs of torque. Torque is what moves you out quick!

"There is no substitute for cubic inches."

Regards,

Fred

12-19-2007, 08:55 PM	#1 (permalink)
72droptop Junior Member Join Date: Feb 2007 Location: charlotte, nc Posts: 10	chevy 454 i was wondering are there any special motor mounts that i woulld need to install a 454 in 72 cutlass convertible. also is it a good idea to do this? its going to be a total rebuild with the stroker crank

12-20-2007, 04:25 AM	#2 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,937	I don't think it would be a good idea, the Cutlass deserves an Olds engine. and I don't know anything about chevy engines except they are orange. __________________ Dan '46 2 door

12-20-2007, 05:12 AM	#4 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,531	I don't think it would be a good idea. Chevy engines need 4 bolt mains because the blocks are cast out of hardened toothpaste (you know, like the toothpaste on the edge of the sink in the evening). It isn't a good idea to use them. They usualy blow headgaskets at about 4:1 compression. The hi compression engines are 5:1. __________________ "Some men are Baptists, others Catholics. My father was an OLDSMOBILE man." Ralphie Billingsley A Christmas Story 1983 "We rei-eign, supreme, ooooh god! Burrito supreme, and a chicken supreme, and a CUTLASS SUPREME!" Tenacious D 2007

12-20-2007, 11:56 AM	#5 (permalink)
72droptop Junior Member Join Date: Feb 2007 Location: charlotte, nc Posts: 10	chevy 454 thanks how would i build a kick @ss 455 or the 350 rockets that already installed i really want a stroker and would the 400 turbo transmission from chevy work thanks or the Last edited by 72droptop : 12-20-2007 at 12:00 PM. Reason: left something out

12-20-2007, 01:42 PM	#6 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,531	Well, there is alot of advice here on how to build a hi performance 455 or 350. If you build an Olds engine you probably won't build a stroker. That is mostly a Chevy phenomenon. Why would you want to build a stroker when you can buy a 455 which already has a long stroke and makes more torque than you can shake a stick at? BTW, a Chevy TH 400 will NOT bolt up to an Oldsmobile engine. __________________ "Some men are Baptists, others Catholics. My father was an OLDSMOBILE man." Ralphie Billingsley A Christmas Story 1983 "We rei-eign, supreme, ooooh god! Burrito supreme, and a chicken supreme, and a CUTLASS SUPREME!" Tenacious D 2007

12-20-2007, 01:46 PM	#7 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 750	The 400 tranny will work, but you'll need an adapter plate to hook it up to the motor. BPO have a differnet bolt pattern than Chevys Get a good 350 or 455 (350, 395558 "2" block from 68 to 72 cast iron and soild mains, maybe somebody else can shead light on the best 455) and basicly a good cam, lifters, decent manifold, decent ign, good heads (stock 5 or 7a for small blocks and C for the big block) and a set of headers and you'll have a pretty decent streetalbe motor. Just be sure to get good cooling, and a deeper oil pan would be a good idea too! __________________ Me 2000 Alero running 14's 1985 Delta 88 w/1968 350 rocket 2005 Nissan Altima (her's)

12-21-2007, 11:12 AM	#8 (permalink)
72droptop Junior Member Join Date: Feb 2007 Location: charlotte, nc Posts: 10	thanks for the info. it's not cool to be the dumb one, but with guys like you all, that got my back, it's kinda Ok.

12-21-2007, 11:15 AM	#9 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,937	No, I wouldn't say the dumb one. It is all relative, there is always someone, someplace that knows more than me, or you, or (fill in the blank). We just like our Oldsmobiles. __________________ Dan '46 2 door

12-21-2007, 11:25 AM	#10 (permalink)
72droptop Junior Member Join Date: Feb 2007 Location: charlotte, nc Posts: 10	found a big block. the casting numbers are 396021F out of a 1975 olds. is ths a good block to rebuild Last edited by 72droptop : 12-21-2007 at 11:40 AM. Reason: wrong number

12-22-2007, 09:40 PM	#12 (permalink)
z11375ss Senior Member Join Date: Jan 2007 Location: Chicago Posts: 193	I've had both engines and liked the Olds better. Stump pulling torque opposed to needing to rev high to produce power. Small blocks are different though. I like my 71 LT1 Vette, it screams! __________________

12-23-2007, 04:52 AM	#13 (permalink)
66 Holiday 461 Rocketman Join Date: Dec 2007 Posts: 7	You are only the dumb one if you stick a cheby in your Olds. The car would never recover from the shame.

12-23-2007, 05:56 AM	#14 (permalink)
Olds64 Landyacht Club President Join Date: Jul 2007 Location: Lawton, OK Posts: 1,531	Yeah, I think it would be a bad case of automotive suicide. The car would probably just give up. __________________ "Some men are Baptists, others Catholics. My father was an OLDSMOBILE man." Ralphie Billingsley A Christmas Story 1983 "We rei-eign, supreme, ooooh god! Burrito supreme, and a chicken supreme, and a CUTLASS SUPREME!" Tenacious D 2007

12-25-2007, 05:19 PM	#15 (permalink)
GoodOldsGuy Member Join Date: Dec 2007 Location: Cary, NC Posts: 40	Use the 455 engine, mild cam, headers, Torker intake coupled with a Turbo 400 trans 12 bolt Olds with 3:42 gear and you will have a fast and reliable street machine with gobs of torque. Torque is what moves you out quick! "There is no substitute for cubic inches." Regards, Fred

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
455 vs 454 pro's and con's of both no flaming plz	shaks 442 clone	Small Blocks	6	05-31-2007 08:42 AM
chevy	robs65nova	Small Blocks	17	04-11-2007 03:29 PM
'88 Chevy 3500 dually	grimlock	Cars For Sale	3	04-01-2007 03:07 PM
1970 Olds Cutlass W/454 Big Block Chevrolet	dustyk70	Cars For Sale	0	03-07-2007 07:21 PM
If not a 455 - maybe a 427 or 454?	grandmas73rocket	Big Blocks	2	11-23-2004 04:51 AM