ClassicOldsmobile.com - View Single Post

Oldsguy · February 1st, 2009, 03:40 PM

Alexxx,

Here are your specs.

shipping: weight 3,255 US pounds
wheelbase: 115 inches
overall length: 204.2 inches
Front tread width: 58 inches
Rear tread: 59 inches

425 engine: cast iron block, 4.125 inches bore, 3.975 inches stroke, compression ratio 10.25:1, rated brake horsepower 310, 5 main bearings, hydraulic valve lifters, Rochester 2GC carburetor (two barrel). NOTE, this engine does not show as being standard for the f85 (Cutlass) line in 1966 so your engine may have been a special order which it seems was possible.

Hope this helps you out.

February 1st, 2009, 03:40 PM	#15 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,360	Alexxx, Here are your specs. shipping: weight 3,255 US pounds wheelbase: 115 inches overall length: 204.2 inches Front tread width: 58 inches Rear tread: 59 inches 425 engine: cast iron block, 4.125 inches bore, 3.975 inches stroke, compression ratio 10.25:1, rated brake horsepower 310, 5 main bearings, hydraulic valve lifters, Rochester 2GC carburetor (two barrel). NOTE, this engine does not show as being standard for the f85 (Cutlass) line in 1966 so your engine may have been a special order which it seems was possible. Hope this helps you out. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.