|
2 things...
(I first read this post thinking it was new...)
Yeah, Mondello can be a pain. I had a bunch of orders screwed up.
I was gonna say check everything thoroughly before install.
Like take the cam down to a machine shop and have them measure everything.
The second is...that's pretty stout cam. 108 LSA is not what you were looking
for IF you wanted just a hair above stock for an agressive idle.
What's stock lift in a 66 425? About .468"
Your new cam has .520.
Your valve geometry may be on the ragged edge of misalignment.
Your not going to be pulling as much vacuum as you were.
That cam has the potential to run low 12's in a 425.
I don't think it was the right choice.
-Sorry, I know you didn't want to hear this opinion...
And someone correct me if they disagree.
|