Got rid of the coil spring and shock.
This is the spring pocket in the frame seen from underneath. It is going to be a lot of cutting in this part.
Cutting some plates that is going to be airbag mounts.
The bag.
Drilling holes in the airbag mounts.
Nuts going to be welded in the centre of the upper airbag mounts for pin bolt.
Upper bag mount welded, 4" tube.
I made the tube quite long so I can cut it shorter after testing.
First test.
There will a bag mount in the bottom as well...
Starting to trim the spring pocket for clearence againt the bag.
More space, but it will be trimmed more later on.....
Another view.
IŽve now reached the point where the swaybar stops further lowering. i made the decision that it had to go. No more swaybar - IŽm goinŽlow!
