ClassicOldsmobile.com - View Single Post - Carb/torque Converter Tech Question for a 350

70Wcars · 12-18-2007, 04:40 PM

I would check with Terry at FCR Performance and with Bullet Cams for advice on your combo. Both companies can make recommendations as well as sell you a cam and any related valve gear you may need to go with it.

On the carb issue, I have cores that I rebuild and I have some ' 73 as well as the later '70s vintage carbs that flow 800 cfm. All of my builds are done one at a time for each particular engine/drivetrain combo. I re-bush the throttle shafts as well. Settle on a cam and exhaust and Converter choice and then we can narrow down which way to go with the carb.

Danny

12-18-2007, 04:40 PM	#14 (permalink)
70Wcars Member Join Date: Jan 2007 Location: Texas Posts: 55	I would check with Terry at FCR Performance and with Bullet Cams for advice on your combo. Both companies can make recommendations as well as sell you a cam and any related valve gear you may need to go with it. On the carb issue, I have cores that I rebuild and I have some ' 73 as well as the later '70s vintage carbs that flow 800 cfm. All of my builds are done one at a time for each particular engine/drivetrain combo. I re-bush the throttle shafts as well. Settle on a cam and exhaust and Converter choice and then we can narrow down which way to go with the carb. Danny __________________ Dan S 70 442 W-30 4-speed 70 442 W-30 Post Coupe Bracket Race car..11.43 @ 3650lbs.