Bench Seats for 66 88

Thread Tools
 
Search this Thread
 
Old Jul 25, 2002 | 11:16 AM
  #1  
EdsDelta's Avatar
Thread Starter
The Charter Member
 
Joined: Dec 2001
Posts: 50
From: Maine, USA
Arrow

Looking for nice bench seats for a full sized 88

reply or send me private message
Old Jul 30, 2002 | 11:39 AM
  #2  
landyacht1's Avatar
Registered User
 
Joined: Jun 2002
Posts: 8
From: idaho
Post

I believe i know where a coule of 88's are what year span, color,fabric or vinyl power or manual? let me know and i will check them out.
Landyacht1
Old Aug 20, 2003 | 12:23 PM
  #3  
EdsDelta's Avatar
Thread Starter
The Charter Member
 
Joined: Dec 2001
Posts: 50
From: Maine, USA
Cool

I'm open for anything that'll bolt down in my 66 88. I have leather bench seats with fabric pattern, light blue. I'd like to sink my teeth into a rear seat that has a radio speaker in the middle. Thanks!
Old Dec 16, 2004 | 05:46 PM
  #4  
66olds's Avatar
Registered User
 
Joined: Dec 2004
Posts: 24
From: London,Canada
Post

Hello Ed! I have a set of black leather bucket seats, driver side power, black back seat with the reverb cut out, with door panels. Arm rests and center console with tachometer minus shifter mechanism that I am willing to part with. Door panels are power window. Leather is in very good shape along with door panels.


<blockquote>quote:</font><hr>Originally posted by Ed Hamilton:
I'm open for anything that'll bolt down in my 66 88. I have leather bench seats with fabric pattern, light blue. I'd like to sink my teeth into a rear seat that has a radio speaker in the middle. Thanks!<hr></blockquote>

[ December 16, 2004: Message edited by: 66olds ]</p>
Old Dec 16, 2004 | 09:19 PM
  #5  
jdorour's Avatar
Banned
 
Joined: Feb 2004
Posts: 120
From: Atlanta, GA.
Post

<blockquote>quote:</font><hr>Originally posted by 66olds:
Hello Ed! I have a set of black leather bucket seats, driver side power, black back seat with the reverb cut out, with door panels. Arm rests and center console with tachometer minus shifter mechanism that I am willing to part with. Door panels are power window. Leather is in very good shape along with door panels.

66olds,
If Ed does not want them I might. I think a 98 with buckets and a console would be cool.

John




[ December 16, 2004: Message edited by: 66olds ]
<hr></blockquote>
Old Dec 20, 2004 | 05:47 PM
  #6  
mrolds88's Avatar
Registered User
 
Joined: Aug 2004
Posts: 137
From: WV
Post

Hi Ed,
It's me again. I am still working on the 14"wheel for you. Also I have a rear seat that was taken out a long time ago. It was reupholstered at some point. Wasnt fancy just an off white kinda color. I will check to see if it has the speaker area in it. It might as it was out of a 98. If I remember correctly your car is a 4 door, right?? Email me and we can talk.

Thanks,
Greg
mrolds88
drhotwheels@mybluelight.com
Old Dec 21, 2004 | 05:50 PM
  #7  
66olds's Avatar
Registered User
 
Joined: Dec 2004
Posts: 24
From: London,Canada
Post

Hey, John that may be a cool idea. I think Eds car may be a four door which makes the rear seat useless. This interior is out of a 65 Starfire and is complete minus the reverb speaker and shifter. It includes two black leather buckets (driver side power, and works) all matching interior door panels which includes the rear small panels for the rear seat including arm rests. These also are complete with all the stainless trim which is also in excellent shape. And yes the centre console is also there with the working tachometer unfortunatley however without the shifter. I would like to sell all of the interior together if possible but I have no problem selling pieces separatly. Oh yea this stuff is in nice shape and I can probably arrange to send some pictures.

<blockquote>quote:</font><hr>Originally posted by jdorour:
[QB][/QB]<hr></blockquote>
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
ryneves
General Discussion
11
May 8, 2015 06:57 PM
Dead Reckon
Interior/Upholstery
4
Dec 8, 2013 03:23 PM
Pseudonym
Interior/Upholstery
2
Jan 3, 2011 01:51 PM
4-Speed
Interior/Upholstery
8
Jan 24, 2010 06:44 PM
sleeton
Cutlass
3
Nov 9, 2009 01:50 PM




All times are GMT -7. The time now is 10:06 PM.