Jetaway dipstick help

kmccox11 · December 5th, 2008, 11:47 AM

I have a 1965 F-85 Deluxe with the 330 and a Jetaway, the problem is I am missing the dipstick for the trans and the only replacement i can find is a used one for $50, and i'm not spending $50 on a used dipstick. so is there anyone out there with a 65 with the jetaway that can measure from the bottom end of the handle to the bottom tip on the dipstick and also how far up from the bottom tip the low/full lines are. I would greatly appriciate it, this way i can just make one myself with my dremel.

Wasted · December 6th, 2008, 03:22 PM

The dipstick is 20.5 inches, and it about 3 inches from the bottom tip to the full line.

citcapp · December 6th, 2008, 03:28 PM

Looks like you could us a turbo 350 dipstick and just remark it with a file

kmccox11 · December 8th, 2008, 09:46 AM

wasted, thanks for the measurements that helps a ton

Quote:

Originally Posted by citcapp

Looks like you could us a turbo 350 dipstick and just remark it with a file

thats what i was thinking too

December 5th, 2008, 11:47 AM	#1 (permalink)
kmccox11 Registered User Join Date: Dec 2008 Posts: 7	Jetaway dipstick help I have a 1965 F-85 Deluxe with the 330 and a Jetaway, the problem is I am missing the dipstick for the trans and the only replacement i can find is a used one for $50, and i'm not spending $50 on a used dipstick. so is there anyone out there with a 65 with the jetaway that can measure from the bottom end of the handle to the bottom tip on the dipstick and also how far up from the bottom tip the low/full lines are. I would greatly appriciate it, this way i can just make one myself with my dremel.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
jetaway	65cutty	Transmission	13	November 28th, 2008 01:12 PM
Need the p/n for a dipstick tube	dan2286	Small Blocks	4	August 22nd, 2008 11:57 AM
hey dipstick!	scubastever	Small Blocks	3	May 15th, 2008 07:13 AM
dipstick too small	dan2286	Small Blocks	2	March 15th, 2008 03:56 PM
Jetaway	<Derek Anthony>	Transmission	2	November 26th, 2005 06:14 PM

December 6th, 2008, 03:22 PM	#2 (permalink)
Wasted Registered User Join Date: Jul 2007 Location: Tucson, AZ Posts: 211	The dipstick is 20.5 inches, and it about 3 inches from the bottom tip to the full line.

December 6th, 2008, 03:28 PM	#3 (permalink)
citcapp Super Moderator Join Date: Nov 2007 Location: Bothell, WA Posts: 3,445	Looks like you could us a turbo 350 dipstick and just remark it with a file