|
|
|||||||
| Forums | Gallery | Encyclopedia | Tech | Olds Junction | Register | FAQ | Members List | Calendar | Search | Today's Posts | Mark Forums Read |
 |
|
|
Thread Tools | Display Modes |
04-23-2008, 01:57 AM
|
#1 (permalink) |
|
Junior Member
Join Date: Apr 2008
Location: montreal
Posts: 9
|
transmission automatic to manual
I have a 350 rocket golden edition and the transmission is a automatic and I would like to changed for a manual.It's possible or not!help about this tanks
|
|
|
|
04-23-2008, 02:40 AM
|
#2 (permalink) | |
|
Junior Member
Join Date: Oct 2004
Location: Southern CA
Posts: 852
|
__________________
Quote:
|
|
|
|
|
|
04-30-2008, 07:32 PM
|
#3 (permalink) |
|
Senior Member
Join Date: Jan 2007
Location: Chicago
Posts: 98
|
I am in the process of doing just this. I went on ebay and found a complete 4 speed. EVERYTHING, springs, z-bar, balls, flywheel,bellhousing, pedals, trans, etc. I then found a 4 speed crank and had the motor rebuilt with it being installed. So far no problems. This is the expensive way to do it but also the easiest.
__________________
|
|
|
|
|
05-03-2008, 06:01 AM
|
#4 (permalink) |
|
Junior Member
Join Date: Dec 2007
Posts: 16
|
i have a three speed manual trans with every thing you need including streeing wheel call 937 2701823
|
|
|
|
|
05-10-2008, 09:52 AM
|
#5 (permalink) |
|
Moderator
Join Date: Mar 2007
Location: Northern VA
Posts: 1,430
|
Read the link that Norm posted above. Your biggest problem is the pilot bearing recess in the crank (or lack thereof). By the way, ALL 350 Olds motors were painted gold (at least until the mid 1970s). The color means nothing.
__________________
Joe Padavano 64 Jetstar 88 Conv 66 442 L-69 Conv 68 W-30 69 H/O 69 442 70 W-30 72 442 84 Custom Cruiser 86 Caprice wagon (w/307 Olds) |
|
|
|
|
05-10-2008, 12:48 PM
|
#6 (permalink) |
|
Senior Member
Join Date: Jan 2007
Location: Chicago
Posts: 98
|
Absolutely correct. I rebuilt my small block with the different crank so I could install the 4 speed. The most difficult part of the whole deal. I know there are jigs out there to drill the notch but am not sure how to get one or go about doing it. Good Luck!
__________________
|
|
|
|
|
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Best way to flush an automatic transmission? | a6m5zerosen | Transmission | 1 | 01-03-2008 02:57 PM |
| 1964 Cutlass Automatic Floor Shifter | harleyrules | Parts Wanted | 6 | 11-02-2007 09:57 PM |
| 69 automatic console plate | bigbrother | Transmission | 3 | 07-16-2007 06:27 AM |
| 65 automatic console and aftermarket shifter??? | denis | Interior/Upholstery | 1 | 02-22-2007 11:51 PM |
| 1984 Delta 88 automatic transmission | ztim | Eighty-Eight | 7 | 09-12-2006 09:41 AM |
Linear Mode
