2004r dust shield hardware size

68conv455 · October 9th, 2009, 07:07 PM

Does anyone know what size bolts (screws?) hold the dust cover over the torque convertor on a 2004r transmission? Nothing seems to thread by hand.
Thanks.

J-(Chicago) · October 9th, 2009, 07:44 PM

I believe they have a 10MM head on them. Probably the same ones that hold 80's fenders on.

sixty9olds · October 9th, 2009, 07:49 PM

If the head is 10 mm it would probably be a 6mm x 1.0 thread.

October 9th, 2009, 07:07 PM	#1 (permalink)
68conv455 Registered User Join Date: Oct 2007 Posts: 259	2004r dust shield hardware size Does anyone know what size bolts (screws?) hold the dust cover over the torque convertor on a 2004r transmission? Nothing seems to thread by hand. Thanks.

October 9th, 2009, 07:44 PM	#2 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 2,696	I believe they have a 10MM head on them. Probably the same ones that hold 80's fenders on. __________________ I'd rather have a numbers matching poker hand.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
very small question on bench seat hardware	REDROCKER-S	Interior/Upholstery	10	October 30th, 2009 07:49 PM
New hardware	jimmy69442	Chassis/Body/Frame	0	September 17th, 2008 04:25 PM
2004r Conversion	jonstringer	Transmission	1	May 7th, 2008 08:30 PM
t top hardware	blazes67	Parts Wanted	0	February 17th, 2008 04:03 PM
2004r question	kjones6039	Transmission	2	July 7th, 2006 07:44 AM

October 9th, 2009, 07:49 PM	#3 (permalink)
sixty9olds Registered User Join Date: Jun 2009 Location: High Point, NC Posts: 79	If the head is 10 mm it would probably be a 6mm x 1.0 thread.