Carb line and heater choke pipe assembly?

chaosklima · April 26th, 2007, 12:59 PM

Hi all
I'm having the Q-Jet rebuilt for my 1970 Toro and in the meantime I'm trying to find a replacement carburetor fuel line and a choke heater pipe assembly. I've tried Fusick, USAParts, and a host of the other usual places with no luck. A few people have mentioned fabricating the lines myself or using braided flex lines, but I'd much prefer to use pre-fabbed OEM or NOS lines if possible.

Any recommendations or suggestions on where to find these lines?

Thanks,

B

joe_padavano · April 27th, 2007, 12:39 PM

Try one of these companies:

http://www.inlinetube.com/
http://www.rightstuffdetailing.com/
http://www.classictube.com/

Note that the owners of Inline Tube have several 442s

April 26th, 2007, 12:59 PM	#1 (permalink)
chaosklima Junior Member Join Date: Oct 2006 Posts: 5	Carb line and heater choke pipe assembly? Hi all I'm having the Q-Jet rebuilt for my 1970 Toro and in the meantime I'm trying to find a replacement carburetor fuel line and a choke heater pipe assembly. I've tried Fusick, USAParts, and a host of the other usual places with no luck. A few people have mentioned fabricating the lines myself or using braided flex lines, but I'd much prefer to use pre-fabbed OEM or NOS lines if possible. Any recommendations or suggestions on where to find these lines? Thanks, B

April 27th, 2007, 12:39 PM	#2 (permalink)
joe_padavano Super Moderator Join Date: Mar 2007 Location: Northern VA Posts: 4,331	Try one of these companies: http://www.inlinetube.com/ http://www.rightstuffdetailing.com/ http://www.classictube.com/ Note that the owners of Inline Tube have several 442s __________________ Joe Padavano 64 Jetstar 88 Conv 66 442 L-69 Conv 68 W-30 69 H/O 69 442 70 W-30 72 442 84 Custom Cruiser 86 Caprice wagon (w/307 Olds)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode