68 Toro trim

68Toro71442 · 01-11-2007, 05:22 PM

I recently purchased a 68 Toro which is in rather good shape. I am looking for some good trim pieces for the front end.
One piece is the Rocket Emblem on the front bumper. As far as I can tell it is a 68 only emblem. Although the 69 had the same bumper, there was no rocket emblem on the bumper.
I am also looking for the rubber trim piece that runs along the front edge of the hood. This must be the same for both the 68 and 69, and maybe the 1970.
I have searched e-bay but no luck. I would appreciate any information on sources for these parts.

2blu442 · 01-14-2007, 10:09 PM

I may have the rubber piece, it's sandwiched between the hood and a thin metal piece, does that sound right? What part of the country are you in? John

2blu442 · 01-15-2007, 05:15 PM

Hi Bob
I hesitate to use my phone number or email address in open communications. I would rather share that information in a private message. Put your mouse pointer on my name, click left mouse key, then a dropdown window opens that gives the option for a private message.

The rubber piece is sandwiched between the hood and the thin metal piece with 1/4" sheetmetal screws. The rubber would be easy to ship as it's soft enough to coil and put in a smaller box. If you decide you need the thin metal trim I might be able to put it in a section of pvc pipe to ship. I can provide photos for you. John

01-11-2007, 05:22 PM	#1 (permalink)
68Toro71442 Junior Member Join Date: Jan 2007 Posts: 6	68 Toro trim I recently purchased a 68 Toro which is in rather good shape. I am looking for some good trim pieces for the front end. One piece is the Rocket Emblem on the front bumper. As far as I can tell it is a 68 only emblem. Although the 69 had the same bumper, there was no rocket emblem on the bumper. I am also looking for the rubber trim piece that runs along the front edge of the hood. This must be the same for both the 68 and 69, and maybe the 1970. I have searched e-bay but no luck. I would appreciate any information on sources for these parts.

01-14-2007, 10:09 PM	#2 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 936	I may have the rubber piece, it's sandwiched between the hood and a thin metal piece, does that sound right? What part of the country are you in? John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

01-15-2007, 05:15 PM	#3 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 936	Toro hood piece Hi Bob I hesitate to use my phone number or email address in open communications. I would rather share that information in a private message. Put your mouse pointer on my name, click left mouse key, then a dropdown window opens that gives the option for a private message. The rubber piece is sandwiched between the hood and the thin metal piece with 1/4" sheetmetal screws. The rubber would be easy to ship as it's soft enough to coil and put in a smaller box. If you decide you need the thin metal trim I might be able to put it in a section of pvc pipe to ship. I can provide photos for you. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode