i have a stock 1972 350 with # 7 heads

[godson]

my question is this is a complete stock motor from the exhaust manifolds to points ignition it has the real ram air no ticks no smoke no nothing with the motor im looking to get max hp with it i was wondering what is the largest cam i can use with this motror im willing to upgrade things i just want that big cam sound is all any help or any 1 who is willing to teach me im willing to learn

[godson]

im puting on a nice torqthrust 22 inch rim i just want to be able to light them up with no problem and also have it run extremly well any help please on what step to take i have about 1300 to spend and my brother can get me really good discounts thanks guys for any help you may have

[projectheaven]

I know what you're trying to do because I have done it.I have 24 inch wheels on my cutlass and I can light them up just by tapping on the gas.

Other posts on here say the max you can go is a .500 lift with the stock springs.I have a cam in mines but it isn't that high but is noticeable.

With a good tune up you should be able to spin those 22's with no problem.Oldsmobiles have good low end torque.I have the videos to prove it.

[godson]

is your car on youtube if so i look at it all the time and it is very nice thats where i got the idea to up tha apperence of mine im going with a big lip in the rear with red inserts in tha rims