HELP!! Need hot air choke tube...

perksolds · 05-17-2006, 06:21 PM

Hey folks. Where can I find a replacement hot air choke tube for a small block Rocket 350? I fabricated one out of aluminum, but that sucker melted due to the heat in less than 3 months and now has broken off and falled down the exhaust crossover passage. I am refering to the choke tube that drops down inside the intake manifold on the pass side and connects to the choke and back of the carb. I do not want to convert to electric choke. I can't seem to locate one anywhere. Any help very much appreciated. I may not check the forum as often as I would like, so you can e-mail me at scottperkins27@yahoo.com
Thanks!
Scott

Oldsguy · 05-18-2006, 12:30 PM

Man if that aluminum melted then your engine is getting pretty hot! How about fabricating one from stainless?

clloyd · 06-05-2006, 12:10 PM

Fusick.com

AggieOlds · 07-27-2006, 07:58 PM

YEAR ONE has them. That's were I bought mine.

1BAD68"S" · 08-24-2006, 07:34 PM

hey you still need one...i got one that is for a 2bbl car(intake) real good shape...let me know if you still need it...we can barter(trade)or if you dont have anything that i need ill just sling it your way

05-17-2006, 06:21 PM	#1 (permalink)
perksolds Junior Member Join Date: May 2006 Posts: 1	HELP!! Need hot air choke tube... Hey folks. Where can I find a replacement hot air choke tube for a small block Rocket 350? I fabricated one out of aluminum, but that sucker melted due to the heat in less than 3 months and now has broken off and falled down the exhaust crossover passage. I am refering to the choke tube that drops down inside the intake manifold on the pass side and connects to the choke and back of the carb. I do not want to convert to electric choke. I can't seem to locate one anywhere. Any help very much appreciated. I may not check the forum as often as I would like, so you can e-mail me at scottperkins27@yahoo.com Thanks! Scott

05-18-2006, 12:30 PM	#2 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,553	Man if that aluminum melted then your engine is getting pretty hot! How about fabricating one from stainless? __________________ Dan '46 2 door

08-24-2006, 07:34 PM	#5 (permalink)
1BAD68"S" Member Join Date: Jul 2006 Posts: 65	hot air choke tube... hey you still need one...i got one that is for a 2bbl car(intake) real good shape...let me know if you still need it...we can barter(trade)or if you dont have anything that i need ill just sling it your way

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
76 cutlass salon info needed	76ttop	Cutlass	3	02-05-2007 11:29 AM
215ci turbo intake	sgtrocko1	Parts For Sale	0	09-03-2006 11:19 AM
For Sale: Oldsmobile Car Heater From The 40's	goodkarmech	Parts For Sale	0	09-03-2006 07:52 AM
2004r question	kjones6039	Transmission	2	07-07-2006 06:44 AM
303 starter motor	jerry d	Electrical	1	04-18-2006 05:05 AM

06-05-2006, 12:10 PM	#3 (permalink)
clloyd Junior Member Join Date: May 2006 Posts: 24	Fusick.com

07-27-2006, 07:58 PM	#4 (permalink)
AggieOlds Junior Member Join Date: Feb 2006 Location: Houston, Texas Posts: 14	YEAR ONE has them. That's were I bought mine.