350 pistons

77omega · 05-09-2008, 05:45 PM

I'm building a dirt track car with an olds 350 in it. It will be raced in the strictly stock class. I would like to bump up the compression by using flat top pistons, but i don't need forged pistons. Does anyone carry an inexpensive set of flat tops? Thanks MIKE

captjim · 05-09-2008, 07:25 PM

Nope. In fact, the only 2 that I know of at all are the speed pros and Probes (4cc relief). Both forged and in the $400 range. But, if you can bore it out to 4.125,you can use 400 SBC pistons, not sure what your rules allow. You will need to rebush the rod.

05-09-2008, 05:45 PM	#1 (permalink)
77omega Junior Member Join Date: May 2008 Posts: 19	350 pistons I'm building a dirt track car with an olds 350 in it. It will be raced in the strictly stock class. I would like to bump up the compression by using flat top pistons, but i don't need forged pistons. Does anyone carry an inexpensive set of flat tops? Thanks MIKE

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
350 Rocket shortblock - 350 THM Transmission - Cheap - Louisville, Ky.	esisson	Parts For Sale	1	05-22-2008 07:47 PM
Flattop Pistons with #7 Heads????	Olds71suprema	Small Blocks	6	05-10-2008 09:44 AM
350 Gold Rocket & 350 Turbo Trans For Sale	cutlassKing	Parts For Sale	4	03-23-2008 10:30 PM
sbo heads & pistons 350	Big J	Parts Wanted	1	04-21-2007 08:31 PM
72 Cutlass Convertable Pistons Leak	VanZant	Chassis/Body/Frame	1	08-07-2004 03:44 PM

05-09-2008, 07:25 PM	#2 (permalink)
captjim Senior Member Join Date: Aug 2007 Posts: 122	Nope. In fact, the only 2 that I know of at all are the speed pros and Probes (4cc relief). Both forged and in the $400 range. But, if you can bore it out to 4.125,you can use 400 SBC pistons, not sure what your rules allow. You will need to rebush the rod.