350 intake manifold

68rocketred · April 9th, 2008, 10:12 AM

I have a 68 350 rocket engine with a two barrel trying to keep it looking stock are there any performance 4bbl intake manifold from oldsmobile that will fit on the engine. Will a 400 block 442 intake manifold fit ?

Redog · April 9th, 2008, 11:40 AM

I think the 400 442 block was a different angle.

You could get a Edelbrock Preformer mani (#3711) and paint it (or powercoat it) gold

They are pretty much the same as stock, flow wise at least.

You could get an adapter for a 4 barrel carb to a 2 barrel mani

rccktmn2 · April 9th, 2008, 03:41 PM

I believe the 400 is a big block and the 350 is a small block so the intake manifolds will not interchange. Edelbrock, Offenhauser, there are some stock aluminum manifolds for a 350. PAW (performance automotive warehouse) will have a pretty good selection.

Rallye469 · April 9th, 2008, 04:06 PM

A stock 68-70 olds 350 4 bbl manifold will benefit you.
The only stock performance manifold made was the W-31 aluminum
piece, but it'll cost you a pretty penny.

I've heard...and don't quote me, the edelbrock performer is pretty
much a stock manifold cast in aluminum. Aside from weight, there's
not much to gain. But I do like the idea of painting it and keeping a stock look.
You can usually score one on ebay for about $100.00

April 9th, 2008, 10:12 AM	#1 (permalink)
68rocketred Junior Member Join Date: Apr 2008 Posts: 3	350 intake manifold I have a 68 350 rocket engine with a two barrel trying to keep it looking stock are there any performance 4bbl intake manifold from oldsmobile that will fit on the engine. Will a 400 block 442 intake manifold fit ?

April 9th, 2008, 11:40 AM	#2 (permalink)
Redog Alero Chapter Secretary Join Date: Aug 2006 Location: Newtown, PA Posts: 1,145	I think the 400 442 block was a different angle. You could get a Edelbrock Preformer mani (#3711) and paint it (or powercoat it) gold They are pretty much the same as stock, flow wise at least. You could get an adapter for a 4 barrel carb to a 2 barrel mani __________________ Me 2000 Alero running 14's 2005 Nissan Altima (her's) 1967 Olds 330 motor sitting on a stand 1985 Delta 88 w/1968 350 rocket ( MURDERED )

April 9th, 2008, 04:06 PM	#4 (permalink)
Rallye469 Senior Member Join Date: Feb 2008 Posts: 236	A stock 68-70 olds 350 4 bbl manifold will benefit you. The only stock performance manifold made was the W-31 aluminum piece, but it'll cost you a pretty penny. I've heard...and don't quote me, the edelbrock performer is pretty much a stock manifold cast in aluminum. Aside from weight, there's not much to gain. But I do like the idea of painting it and keeping a stock look. You can usually score one on ebay for about $100.00 __________________ '70 Rallye 350 '65 F-85 http://www.youtube.com/watch?v=CCw-JmwNGZQ

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Intake Manifold & Carb. - Decisions	esisson	Big Blocks	12	March 28th, 2008 07:34 AM
intake manifold	sborruso	Parts Wanted	4	January 8th, 2008 01:10 PM
1978 intake manifold	jjatich	Small Blocks	3	July 29th, 2007 08:57 PM
Need intake manifold	SMOKEYMTNKUSTOMS	Parts Wanted	1	October 12th, 2006 01:18 PM
Buddy Bar Intake Manifold for Olds	magnusdog	Small Blocks	2	September 2nd, 2006 11:01 PM

April 9th, 2008, 03:41 PM	#3 (permalink)
rccktmn2 Registered User Join Date: Jan 2008 Location: Paulding ohio Posts: 31	I believe the 400 is a big block and the 350 is a small block so the intake manifolds will not interchange. Edelbrock, Offenhauser, there are some stock aluminum manifolds for a 350. PAW (performance automotive warehouse) will have a pretty good selection.