headers

Grimes · July 28th, 2003, 02:37 PM

Please help me. What kind of headers will fit a 350 Olds. motor that has been instaled into a 67 Cutlass?

70ragtop · August 10th, 2003, 10:17 PM

Any of the headers that were designed to fit a 67 Cutlass with a 330 will bolt right up to the 350.

I use the Dynomax myself. Great fit and low price.

[ September 08, 2003: Message edited by: 70ragtop ]</p>

bigcaser · June 26th, 2004, 04:02 PM

what would u suggest for headers for a '72 cutlass supreme? i have tried hooker and hedman and found that they dont make headers for the supreme model.

jagness · August 21st, 2004, 07:22 PM

Kooks is the only company that makes headers for an SBO in a 64-67 A body. They're expensive, but they're the best headers you'll ever buy anywhere. Far higher quality than Hookers.

Contrary to what a lot of manufacturers seem to think, there's no difference in fitment between headers for a Cutlass and a Cutlass Supreme.

August 10th, 2003, 10:17 PM	#2 (permalink)
70ragtop Member Join Date: Dec 2001 Location: Dallas, Texas Posts: 32	Any of the headers that were designed to fit a 67 Cutlass with a 330 will bolt right up to the 350. I use the Dynomax myself. Great fit and low price. [ September 08, 2003: Message edited by: 70ragtop ]</p> __________________ Jeff Herbert (70RagTop) Dallas TX 70 Cutlass Supreme Convertible 68 Cutlass S Convertible 72 Cutlass Supreme Hardtop

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Oil Filter Conversion To Spin On	J'ville	Eighty-Eight	2	July 10th, 2009 04:18 PM
i need a roof section for 68 cutlass coupe	1BAD68"S"	Chassis/Body/Frame	6	January 12th, 2007 03:22 PM
Engine Identification Please	tristansdaz	Small Blocks	1	May 1st, 2006 07:54 AM
Tech and "How I did it" posts	Oldsguy	Other	2	April 24th, 2006 08:43 AM

July 28th, 2003, 02:37 PM	#1 (permalink)
Grimes Junior Member Join Date: Jul 2003 Posts: 1	Please help me. What kind of headers will fit a 350 Olds. motor that has been instaled into a 67 Cutlass?

June 26th, 2004, 04:02 PM	#3 (permalink)
bigcaser Junior Member Join Date: Jun 2004 Location: Lincoln,NE Posts: 4	what would u suggest for headers for a '72 cutlass supreme? i have tried hooker and hedman and found that they dont make headers for the supreme model.

August 21st, 2004, 07:22 PM	#4 (permalink)
jagness Junior Member Join Date: Aug 2004 Location: Texas Posts: 2	Kooks is the only company that makes headers for an SBO in a 64-67 A body. They're expensive, but they're the best headers you'll ever buy anywhere. Far higher quality than Hookers. Contrary to what a lot of manufacturers seem to think, there's no difference in fitment between headers for a Cutlass and a Cutlass Supreme.