71cutlass s hp & tq figures

71cutlass35040012 · September 1st, 2006, 02:17 PM

First of all i'm new here and want to say that this site is one of the best! My question is what are the hp & tq numbers, roughly, for my 71 cutlass s w/350, 4bbl, and auto? Just bought the car and was wondering what I had for #'s before I do any upgrades. Thanks for your help, BOB.

Oldsguy · September 1st, 2006, 06:44 PM

The hp rating was 260 for 1971 350 with a 4bbl rochester carb. CR was 8.5:1. You could easily wake the car up with a nice little cam/carb/manifold setup from Edelbrock. Try their rpm series, you can get that stuff at almost any speed shop or mail order outfit. A set of headers will make a noticable difference too. Welcome to our site and hope you have fun with your Cutlass.

71cutlass35040012 · September 2nd, 2006, 06:24 PM

Thank you oldsguy! I was told the engine already has an edelbrock intake and it does have headers, though I don't know the name of the manufacturer. The car sounds great at idle and RPM's increase and decrease w/out backfire or anything. It has a lopeing(?) idle to it so i'm thinking that it might also have had a cam put in already? Anyway, how much power could be expected from a carb, intake, header, and cam swap? Thanks again for any input. I just can't wait to burn some 5.0 stang's around here!

September 1st, 2006, 02:17 PM	#1 (permalink)
71cutlass35040012 Junior Member Join Date: Sep 2006 Location: norwich, NY Posts: 3	71cutlass s hp & tq figures First of all i'm new here and want to say that this site is one of the best! My question is what are the hp & tq numbers, roughly, for my 71 cutlass s w/350, 4bbl, and auto? Just bought the car and was wondering what I had for #'s before I do any upgrades. Thanks for your help, BOB.

September 1st, 2006, 06:44 PM	#2 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,360	The hp rating was 260 for 1971 350 with a 4bbl rochester carb. CR was 8.5:1. You could easily wake the car up with a nice little cam/carb/manifold setup from Edelbrock. Try their rpm series, you can get that stuff at almost any speed shop or mail order outfit. A set of headers will make a noticable difference too. Welcome to our site and hope you have fun with your Cutlass. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

September 2nd, 2006, 06:24 PM	#3 (permalink)
71cutlass35040012 Junior Member Join Date: Sep 2006 Location: norwich, NY Posts: 3	Thank you oldsguy! I was told the engine already has an edelbrock intake and it does have headers, though I don't know the name of the manufacturer. The car sounds great at idle and RPM's increase and decrease w/out backfire or anything. It has a lopeing(?) idle to it so i'm thinking that it might also have had a cam put in already? Anyway, how much power could be expected from a carb, intake, header, and cam swap? Thanks again for any input. I just can't wait to burn some 5.0 stang's around here!