Internal Assist Handle

dpsgpa · 11-12-2006, 08:16 PM

The internal passenger assist handle on our 2002 Premier is broken.
Evidently the the spring that pulls the handle back up to the stored position has given out.

Tried to get one from the local Olds/Pontiac dealer with no luck. They tried to locate one in the GM parts system and couldn't find one.

I was told when we bought our Premier that it was a federal law that parts has to be made available for at least ten years. This was a concern as it was already announced that Oldsmobile was being phased out by GM.

Does anyone know where I can get this handle or who I can contact at GM to get this problem resolved?

Thanks!

Oldsguy · 11-13-2006, 06:05 AM

I don't know about the Law, never heard that one, but I can tell you that you will have trouble getting parts for your Olds. BTW, I was not aware of that model name, had to check it out, found it was a Silhoutte model. Good luck in your search.

OH, and that is was in the Silhouette section.....

Oldsfan · 11-13-2006, 09:33 AM

If this is the handle in the headliner above the passenger's head, it is still available. I don't know what they were looking at. Part #10293248. Sells for $34.20. GM has plenty of stock. It's in group #15.390 and is called, of all things, a passenger assist handle.

I don't know about any law requiring manufacturer's to supply parts for 10 years. Getting mechanical and body parts for your Silhouette is not going to be a problem. Trim parts will start to discontinue, but I don't suspect at a rate any higher than for other GM makes.

Paul

dpsgpa · 11-21-2006, 10:41 AM

Many thanks Oldsfan!!

I just installed the handle today.

It had been on order thru the Pontiac/Caddilac/Buick (old OLDS) dealer for over 45 days. They eventually told me there was none in the GM parts system anywhere and I should look for one in a salvage yard.

Thanks to your reply I called the local Chevrolet dealer and they told me right away that their distribution center had plenty in stock. The handle came in three days later.

I appreciate you assistance.

phillips066 · 10-23-2007, 05:09 PM

I'd go to the junkyard, I have an 02 silhouette and had a fender bender. I found out that the pontiac montanas and chevy ventures are the same thing just the hood is different. so I am sure the interior parts will work as well.

Oldsguy · 10-24-2007, 04:52 AM

Almost a year old post. Probably already have the problem solved......

11-12-2006, 08:16 PM	#1 (permalink)
dpsgpa Junior Member Join Date: Nov 2006 Location: Gulf Coast Posts: 2	Internal Assist Handle The internal passenger assist handle on our 2002 Premier is broken. Evidently the the spring that pulls the handle back up to the stored position has given out. Tried to get one from the local Olds/Pontiac dealer with no luck. They tried to locate one in the GM parts system and couldn't find one. I was told when we bought our Premier that it was a federal law that parts has to be made available for at least ten years. This was a concern as it was already announced that Oldsmobile was being phased out by GM. Does anyone know where I can get this handle or who I can contact at GM to get this problem resolved? Thanks!

11-13-2006, 06:05 AM	#2 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,536	I don't know about the Law, never heard that one, but I can tell you that you will have trouble getting parts for your Olds. BTW, I was not aware of that model name, had to check it out, found it was a Silhoutte model. Good luck in your search. OH, and that is was in the Silhouette section..... __________________ Dan '46 2 door

11-21-2006, 10:41 AM	#4 (permalink)
dpsgpa Junior Member Join Date: Nov 2006 Location: Gulf Coast Posts: 2	Assist Handle Many thanks Oldsfan!! I just installed the handle today. It had been on order thru the Pontiac/Caddilac/Buick (old OLDS) dealer for over 45 days. They eventually told me there was none in the GM parts system anywhere and I should look for one in a salvage yard. Thanks to your reply I called the local Chevrolet dealer and they told me right away that their distribution center had plenty in stock. The handle came in three days later. I appreciate you assistance.

10-23-2007, 05:09 PM	#5 (permalink)
phillips066 Junior Member Join Date: Oct 2007 Posts: 3	Handle I'd go to the junkyard, I have an 02 silhouette and had a fender bender. I found out that the pontiac montanas and chevy ventures are the same thing just the hood is different. so I am sure the interior parts will work as well.

10-24-2007, 04:52 AM	#6 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,536	Almost a year old post. Probably already have the problem solved...... __________________ Dan '46 2 door

11-13-2006, 09:33 AM	#3 (permalink)
Oldsfan Senior Member Join Date: Jul 2006 Posts: 426	If this is the handle in the headliner above the passenger's head, it is still available. I don't know what they were looking at. Part #10293248. Sells for $34.20. GM has plenty of stock. It's in group #15.390 and is called, of all things, a passenger assist handle. I don't know about any law requiring manufacturer's to supply parts for 10 years. Getting mechanical and body parts for your Silhouette is not going to be a problem. Trim parts will start to discontinue, but I don't suspect at a rate any higher than for other GM makes. Paul

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
wheel trim	cutlass tom	Cutlass	4	01-21-2007 08:14 AM
1972 cutlass supreme	NSolds	Cutlass	3	01-12-2007 08:28 PM