1968 Delmont

Skielk · 12-17-2006, 08:10 PM

I'm looking for a rear bumper for a 1968 Delmont, or if anyone knows do any other bumpers fit this year. Thanks

Oldsguy · 12-18-2006, 05:35 AM

Welcome to our site. I know that the '69 won't because I own a '69 Delta, not sure about '67. You have no bumper at all or just one that isn't salvageable?

Skielk · 12-18-2006, 07:32 AM

I do have a bumper buts its in horrible condition with large holes and large amounts of rust.

2blu442 · 12-18-2006, 07:45 AM

Where are you located? I'm located in Medford Oregon and have two that could be cores if yours is too rusted or damaged to fix. I wouldn't consider either of these to be good enough for a driver unless you were desperate to have something bolted to the car. I'm also dismantling one 1968 Delta 88 and one 1968 Delta Custom, both are two door hardtops and both have 455's. One car is complete, the other mostly complete. Let me know if your needing anything else. John

Skielk · 12-18-2006, 07:38 PM

i'm located in PA. Thanks for the response but the bumper won't fit. I recently found out the 1968 delmont bumper is exclusive to 1968.

2blu442 · 12-18-2006, 07:46 PM

Shipping from Oregon to PA would be expensive, but the bumpers I have are off 1968's. One a Delta 88 the other a Delta Custom but I don't know for sure if the Delmont was the same, I thought it was in the 88 line. If you can't find a good one closer I can provide pictures of what these look like. Greyhound bus lines would probably be between $50-75 to ship, I would sell one for $50 to cover my time. John

Skielk · 12-18-2006, 08:05 PM

If you wouldn't mind could you send the pictures to skielk@udel.edu so i can look at them and see if the bumper will work on the delmont. Thanks

Oldsguy · 12-19-2006, 04:44 AM

I think Delmont and Delta had the same bumpers that year.

12-17-2006, 08:10 PM	#1 (permalink)
Skielk Junior Member Join Date: Dec 2006 Posts: 12	1968 Delmont I'm looking for a rear bumper for a 1968 Delmont, or if anyone knows do any other bumpers fit this year. Thanks

12-18-2006, 05:35 AM	#2 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,167	Welcome to our site. I know that the '69 won't because I own a '69 Delta, not sure about '67. You have no bumper at all or just one that isn't salvageable? __________________ Dan '77 Cutlass Supreme '46 2 door

12-18-2006, 07:45 AM	#4 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 935	Where are you located? I'm located in Medford Oregon and have two that could be cores if yours is too rusted or damaged to fix. I wouldn't consider either of these to be good enough for a driver unless you were desperate to have something bolted to the car. I'm also dismantling one 1968 Delta 88 and one 1968 Delta Custom, both are two door hardtops and both have 455's. One car is complete, the other mostly complete. Let me know if your needing anything else. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

12-18-2006, 07:46 PM	#6 (permalink)
2blu442 Senior Member Join Date: Sep 2006 Location: Medford, Oregon Posts: 935	Shipping from Oregon to PA would be expensive, but the bumpers I have are off 1968's. One a Delta 88 the other a Delta Custom but I don't know for sure if the Delmont was the same, I thought it was in the 88 line. If you can't find a good one closer I can provide pictures of what these look like. Greyhound bus lines would probably be between $50-75 to ship, I would sell one for $50 to cover my time. John __________________ 1964 Cutlass Factory 4spd 1965 442 4spd 1967 442 Auto 1967 Cutlass Convertible 1968 442 Auto 1969 442 W30 Auto 1970 442 4spd 1971 Cutlass Flat Top Wagon 1973 Che*vy 3/4 Ton 454/TH400 Tow Vehicle Only the tow vehicle is finished!

12-19-2006, 04:44 AM	#8 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 3,167	I think Delmont and Delta had the same bumpers that year. __________________ Dan '77 Cutlass Supreme '46 2 door

12-18-2006, 07:32 AM	#3 (permalink)
Skielk Junior Member Join Date: Dec 2006 Posts: 12	I do have a bumper buts its in horrible condition with large holes and large amounts of rust.

12-18-2006, 07:38 PM	#5 (permalink)
Skielk Junior Member Join Date: Dec 2006 Posts: 12	i'm located in PA. Thanks for the response but the bumper won't fit. I recently found out the 1968 delmont bumper is exclusive to 1968.

12-18-2006, 08:05 PM	#7 (permalink)
Skielk Junior Member Join Date: Dec 2006 Posts: 12	If you wouldn't mind could you send the pictures to skielk@udel.edu so i can look at them and see if the bumper will work on the delmont. Thanks

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode