interior pieces

[1971 sienna conv]

I need 70-72 rear window crank (door panels). Its not really a door panel, my car is a 2 door, just tring to explain. I need the metal pieces that the window fuzzy is pop riveted to. It has to be from a 70-72 conv car. help!!!! thanks

[Oldsguy]

Hey welcome to CO! I think those are called rear quarter interior panels. It would seem to me that those things would be kind of generic, only varying in length depending upon model and make. You might be able to find those at a local upholsterer shop. Another source or two may be Year One, Fusick, or Kanter. Good luck in your search and tell us about yourself and your car.

[1971 sienna conv]

Thanks for reply OldsGuy, My name is Mike, 52 year old motor-head. I have a 71 supreme Bittersweet in color, Sienna interior (convertible). I'm doing complete interior, the old interior quarters were aftermarket and fiberglass tops are rotten. I've been dealing with Legendary interiors and they tell me they don't have them. The 71 Hard Top is different than the convertible, by a few inches. Bought this car back in 1981, Its a nice driver. Mike Burnsville,Mn.

[Allan R]

Originally Posted by 1971 sienna conv

I need 70-72 rear window crank (door panels). Its not really a door panel, my car is a 2 door, just tring to explain. I need the metal pieces that the window fuzzy is pop riveted to. It has to be from a 70-72 conv car. help!!!! thanks

Go to this website: http://www.fusick.com/catfile/Catalo...Layout%202.pdf

view the whole catalog or if you just want door panels start on page 57. Hope this is what you're looking for. You might like it better than Legendary. I've heard that Leg sometimes takes shortcuts in their stitching. Fusicks always looks good.

You can also compare this with Parts Place web page. They sell Legendary assembled or unassembled door panels front and back. The file is a .pdf so you can do a seach using the "edit" tab.
http://www.thepartsplaceinc.com/cata...ideimages=true

[Lady72nRob71]

Originally Posted by 1971 sienna conv

I need 70-72 rear window crank (door panels). Its not really a door panel, my car is a 2 door, just tring to explain. I need the metal pieces that the window fuzzy is pop riveted to. It has to be from a 70-72 conv car. help!!!! thanks

Welcome aboard!
Are you needing the complete rear quarter panel (The small version of the door panel?) They are available at Legendary, as well as Fusicks.
However, they do NOT come with the hard plastic (not metal) form that goes over the window sill (which the fuzzy is actually stapled to). You have to remove your old one and glue it to the new panel. These forms are unavailable on their own.
What is wrong with your part?

[1971 sienna conv]

Thanks for reply, looked at your pics nice car. I have bought all the interior pieces for my car, the rear interior quarters came unassembled, so all i need to do is glue to metal uppers and pop rivet window fuzzy. Now for the bad news, my old panels were replaced at some point with aftermarket panels. The fiberglass is so brittle and rotten that i cannot fasten window fuzzy to them. So my hunt is for the original metal that came with the car!!!! Mike

[Allan R]

Originally Posted by 1971 sienna conv

Thanks for reply, looked at your pics nice car. I have bought all the interior pieces for my car, the rear interior quarters came unassembled, so all i need to do is glue to metal uppers and pop rivet window fuzzy. Now for the bad news, my old panels were replaced at some point with aftermarket panels. The fiberglass is so brittle and rotten that i cannot fasten window fuzzy to them. So my hunt is for the original metal that came with the car!!!! Mike

Shouldn't be too much trouble. Just look on the web. There's lots of original door panels that are going for cheap, especially if they are partly fragged and you just need the upper part. Make sure you tell the seller to cut the panel where you want it so it doesn't cost as much to ship.

[1971 sienna conv]

I found a CO member and tried to access him only to find out I need 5 threads so I'm no longer a newbee!!!!!!! I think this member was AZ65 he had some pics of AZ junk yard, lots of old rust free everything. They got to have my metal. mpls, mn. mike