2 71 delta 88 2 doors parting out!

71 delta88guy · 09-22-2007, 07:41 PM

Hi. I have 2 71 delta 88's that I'm parting out. 1 convertable,1 hardtop. Both 2 doors fully loaded. Less cruise control. Both 455's already sold. The rest is up for sale.Let me know your needs. Call 860-848-2430.

pinky · 09-26-2007, 02:35 PM

Hi,
I am looking for the left rear quarter window regulator and the window channel roller (center roller) for the left and right rear quarter windows.

pinky · 09-26-2007, 02:37 PM

it's not a part but since you are parting yours you might know how do I remove the back seat to get to the convertible top motor under the back seat ?

71 delta88guy · 09-26-2007, 02:45 PM

Yes. push the bottom of seat backwards-toward the back and lift. there is a hook in body. Then there are 2 bolts holding the seat belts and the tabs for the seat back. remove bolts and lift seat back out. I have a good motor and cables by the way.

Kennybill · 09-26-2007, 05:21 PM

where r u located?

71 delta88guy · 09-27-2007, 11:17 AM

uncasville ct. 06382

ChrisM · 03-17-2008, 12:09 PM

I am looking for the passenger side gear actuator for the convertible top for my 73 Delta 88; specifically the worm drive inside this actuator. Do you have these?

Thanks,
chris

71 delta88guy · 03-17-2008, 12:19 PM

No. The conv top in it's entirety is already gone. All I have is 2 latches,motor,relays and the cables.Also the switch in dash.The mechanism went into a LOT of other gm vehicles so finding the drive should not present that much of a prob. Pontiacs,buicks,cadillacs,even I think caprices. Good luck.By the way. Anyone need a set of ssIV wheels? Complete with center caps, trim rings?

dynamickds@hotmail.com · 04-11-2008, 07:34 AM

need interior door panels front and rear also need back seat

J-(Chicago) · 04-11-2008, 12:16 PM

I Had your door panels, trim, and glass for you FOR FREE like a year ago, and you stiffed me once I crated everything up for you. Sat in my effen garage for AT LEAST 3 months. Do us all a favor and go away.

J-(Chicago) · 04-11-2008, 12:17 PM

I still have the rear driver's side panel if you need, but It's gonna cost you some loot now.

texasred · 04-12-2008, 05:25 AM

Electric trunk release mechanism?

Thanks.

C.J.

09-22-2007, 07:41 PM	#1 (permalink)
71 delta88guy Member Join Date: Oct 2006 Posts: 69	2 71 delta 88 2 doors parting out! Hi. I have 2 71 delta 88's that I'm parting out. 1 convertable,1 hardtop. Both 2 doors fully loaded. Less cruise control. Both 455's already sold. The rest is up for sale.Let me know your needs. Call 860-848-2430.

09-26-2007, 02:35 PM	#2 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 28	regulator and window channel rollers Hi, I am looking for the left rear quarter window regulator and the window channel roller (center roller) for the left and right rear quarter windows.

09-26-2007, 02:37 PM	#3 (permalink)
pinky Junior Member Join Date: Sep 2007 Posts: 28	oh also it's not a part but since you are parting yours you might know how do I remove the back seat to get to the convertible top motor under the back seat ?

09-26-2007, 05:21 PM	#5 (permalink)
Kennybill Senior Member Join Date: Aug 2005 Location: Youngstown, Ohio Posts: 198	where r u located? __________________ A man has to know his limitations, especially with an Oldsmobile

04-11-2008, 07:34 AM	#9 (permalink)
dynamickds@hotmail.com Junior Member Join Date: May 2007 Posts: 5	door panels need interior door panels front and rear also need back seat

09-26-2007, 02:45 PM	#4 (permalink)
71 delta88guy Member Join Date: Oct 2006 Posts: 69	Yes. push the bottom of seat backwards-toward the back and lift. there is a hook in body. Then there are 2 bolts holding the seat belts and the tabs for the seat back. remove bolts and lift seat back out. I have a good motor and cables by the way.

09-27-2007, 11:17 AM	#6 (permalink)
71 delta88guy Member Join Date: Oct 2006 Posts: 69	uncasville ct. 06382

03-17-2008, 12:09 PM	#7 (permalink)
ChrisM Member Join Date: Oct 2007 Location: Garden Grove, CA Posts: 37	I am looking for the passenger side gear actuator for the convertible top for my 73 Delta 88; specifically the worm drive inside this actuator. Do you have these? Thanks, chris

03-17-2008, 12:19 PM	#8 (permalink)
71 delta88guy Member Join Date: Oct 2006 Posts: 69	No. The conv top in it's entirety is already gone. All I have is 2 latches,motor,relays and the cables.Also the switch in dash.The mechanism went into a LOT of other gm vehicles so finding the drive should not present that much of a prob. Pontiacs,buicks,cadillacs,even I think caprices. Good luck.By the way. Anyone need a set of ssIV wheels? Complete with center caps, trim rings?

04-11-2008, 12:16 PM	#10 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 1,646	I Had your door panels, trim, and glass for you FOR FREE like a year ago, and you stiffed me once I crated everything up for you. Sat in my effen garage for AT LEAST 3 months. Do us all a favor and go away. __________________ I'd rather have a numbers matching poker hand. Last edited by J-(Chicago) : 04-11-2008 at 12:18 PM.

04-11-2008, 12:17 PM	#11 (permalink)
J-(Chicago) Seasoned beater pilot. Join Date: Jan 2007 Location: Chicago Posts: 1,646	I still have the rear driver's side panel if you need, but It's gonna cost you some loot now. __________________ I'd rather have a numbers matching poker hand.

04-12-2008, 05:25 AM	#12 (permalink)
texasred Super Moderator Join Date: Apr 2004 Location: San Antonio, Texas Posts: 807	Electric trunk release mechanism? Thanks. C.J. __________________ Home of the 1971 Cutlass Supreme convertible Super Karate Monkey Death Car.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Parting 1968 Delta Custom, sell/trade parts	2blu442	Eighty-Eight	0	07-06-2007 10:22 AM
Parting out 1968 Delta 88	2blu442	Parts For Sale	4	02-08-2007 07:18 PM
'70 Cutlass doors	70sxw32	Chassis/Body/Frame	2	12-13-2006 08:11 PM
67 Delta parts, doors,core support, etc,etc	Kennybill	Parts For Sale	0	08-04-2005 04:43 AM
1974-1976, Delta 88 2-dr, Both Doors	Geoffrey Hacker	Parts Wanted	0	08-01-2004 01:10 PM