Richmond gear 5 speed complete conversion

WTony · October 11th, 2009, 08:29 AM

Iv got a new (installed but ZERO miles, feet maybe but zero miles, probably less than 1 tenth of a mile pulling in and out of the garage) Richmond gear 4+1, 5 speed trans with Hurst shifter. This is the 3:28 1st gear trans that you can use a 2.56 - 3.08 rear gears with. This eliminates the drive shaft spinning at high RPM like using an overdrive transmission would but still gives you the overdrive benifits of lower highway rpm, also decreasing high rpm shaft vibrations ect.
Included is a new Oldsmobile blowproof bellhousing, clutch fork, flywheel, clutch and pressure plate, (again, new, installed and run, but NO miles.) Comes with NIB throwout bearing and Olds auto crank pilot bearing. Also included are the stick clutch and brake pedals, clutch rod, z bar, zbar frame bracket and pivot ball, clutch adjuster rod and spring, new reverse light switch that mounts to the shifter and the tunnel hump w/boot retainer for a 68-72 "A" body Oldsmobile.
I can also substitute the pedals, z bar ect for a 67 "A" body if thats the year you have instead.
The trans alone is $2100 from Summit now without any of the extras. $3000 OBO for entire set up.
Repaired 67-69 4 speed console with nice top plates avalible for $500 extra, (will not sell seperate until the trans set up sells.)
Pick it up in East Central NJ or it would have to be shipped in multiple boxes. Id rather not ship but....
Shipping extra. Sorry but please dont waist my time asking for shipping quotes unless your serious about buying. NO Paypal on this one. Dont feel like giving away $90+.

rays1930 · October 21st, 2009, 08:04 PM

I don't quite understand the information do you have e-mail or phone number.

Rays1930 305-234-7223 nativeconcepts@bellsouth.net

marcar1993 · October 24th, 2009, 04:43 PM

Damn I wish I had $3000 right now. That's exactly what I need... And around the corner from me too...

1k442 · October 26th, 2009, 09:52 AM

Tony,
PM sent.
Try this web site.
http://www.pro-touring.com/forum/
K

WTony · October 28th, 2009, 05:51 PM

marcar1993 I'll do a kmart layaway with ya if you really want it!

marcar1993 · October 28th, 2009, 08:42 PM

I'd love to take you up on that offer, but I don't know when I'll have the $...
I need to find a job first...

WTony · November 3rd, 2009, 03:54 PM

October 11th, 2009, 08:29 AM	#1 (permalink)
WTony Registered User Join Date: Jul 2009 Posts: 68	Richmond gear 5 speed complete conversion Iv got a new (installed but ZERO miles, feet maybe but zero miles, probably less than 1 tenth of a mile pulling in and out of the garage) Richmond gear 4+1, 5 speed trans with Hurst shifter. This is the 3:28 1st gear trans that you can use a 2.56 - 3.08 rear gears with. This eliminates the drive shaft spinning at high RPM like using an overdrive transmission would but still gives you the overdrive benifits of lower highway rpm, also decreasing high rpm shaft vibrations ect. Included is a new Oldsmobile blowproof bellhousing, clutch fork, flywheel, clutch and pressure plate, (again, new, installed and run, but NO miles.) Comes with NIB throwout bearing and Olds auto crank pilot bearing. Also included are the stick clutch and brake pedals, clutch rod, z bar, zbar frame bracket and pivot ball, clutch adjuster rod and spring, new reverse light switch that mounts to the shifter and the tunnel hump w/boot retainer for a 68-72 "A" body Oldsmobile. I can also substitute the pedals, z bar ect for a 67 "A" body if thats the year you have instead. The trans alone is $2100 from Summit now without any of the extras. $3000 OBO for entire set up. Repaired 67-69 4 speed console with nice top plates avalible for $500 extra, (will not sell seperate until the trans set up sells.) Pick it up in East Central NJ or it would have to be shipped in multiple boxes. Id rather not ship but.... Shipping extra. Sorry but please dont waist my time asking for shipping quotes unless your serious about buying. NO Paypal on this one. Dont feel like giving away $90+. Last edited by WTony; October 22nd, 2009 at 02:48 PM..

October 21st, 2009, 08:04 PM	#2 (permalink)
rays1930 Registered User Join Date: May 2007 Posts: 24	Richmond gear 4+1 I don't quite understand the information do you have e-mail or phone number. Rays1930 305-234-7223 nativeconcepts@bellsouth.net

October 24th, 2009, 04:43 PM	#3 (permalink)
marcar1993 Registered User Join Date: Apr 2007 Location: CNJ Posts: 165	Damn I wish I had $3000 right now. That's exactly what I need... And around the corner from me too... __________________ 1987 Olds Cutlass- Currently getting a 403 w/#5 heads 1972 Plymouth Satellite Wagon- Grandpa bought it new 1991 Plymouth Acclaim- Daily Driver

October 28th, 2009, 08:42 PM	#6 (permalink)
marcar1993 Registered User Join Date: Apr 2007 Location: CNJ Posts: 165	I'd love to take you up on that offer, but I don't know when I'll have the $... I need to find a job first... __________________ 1987 Olds Cutlass- Currently getting a 403 w/#5 heads 1972 Plymouth Satellite Wagon- Grandpa bought it new 1991 Plymouth Acclaim- Daily Driver

November 3rd, 2009, 03:54 PM	#7 (permalink)
WTony Registered User Join Date: Jul 2009 Posts: 68	bttt

October 26th, 2009, 09:52 AM	#4 (permalink)
1k442 Registered User Join Date: Apr 2007 Location: Long Branch, NJ Posts: 73	Tony, PM sent. Try this web site. http://www.pro-touring.com/forum/ K

October 28th, 2009, 05:51 PM	#5 (permalink)
WTony Registered User Join Date: Jul 2009 Posts: 68	marcar1993 I'll do a kmart layaway with ya if you really want it!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
posi 10 bolt rear end with 4.10 richmond gear set	jensenracing77	Parts For Sale	1	September 3rd, 2009 05:03 PM
1967 330 4bbl complete with jetway 2 speed	jgouette	Parts For Sale	2	September 28th, 2008 07:09 AM
3 Speed hydramatic 1963 F85 Driven gear	nigelf	Transmission	2	March 7th, 2008 04:33 AM
4 speed conversion	scrappie	General Discussion	11	March 1st, 2008 08:49 AM
Complete 4 speed for '68 Cutlass	z11375ss	Parts Wanted	7	January 31st, 2007 07:54 PM