Parting 1973 Olds 98 4 door
#42
Hey John, yeah thats the piece I took a pic of it on my passenger side on my car. I tried seeing how one takes that rubber piece out. On my driver side it seems to slide right out if your careful enough but my right side seemed like it was in there. But it is cold out too, so theres not much flex there. Heres a pic of it:
Its the rubber piece that sits in that metal piece. Although the back door window in that 98 is shaped differently the front windows are not shaped differently so this should work because it has to sit against it the same way. That rubber piece kind of flaps over. My drivers side doesnt and its kind a pain. Also glad you might have a air cleaner, all the ones I have tryed to get are for either chevy or pontiac and the breather cap is on the driver side for those. The oldsmobile one is on the passenger side with the heat tube, and where I live I just cant seem to find an Olds one lol, Thanks, Gustav
Its the rubber piece that sits in that metal piece. Although the back door window in that 98 is shaped differently the front windows are not shaped differently so this should work because it has to sit against it the same way. That rubber piece kind of flaps over. My drivers side doesnt and its kind a pain. Also glad you might have a air cleaner, all the ones I have tryed to get are for either chevy or pontiac and the breather cap is on the driver side for those. The oldsmobile one is on the passenger side with the heat tube, and where I live I just cant seem to find an Olds one lol, Thanks, Gustav
#43
Skinny, I pulled the axles. Here's a couple pictures of them. The wheel bearings look different, but they both feel smooth and I believe they're good.
P1010007-1.jpg
P1010008-2.jpg
Shawn, I pulled the rear springs and here's a picture
P1010011.jpg
Gustav, I worked on the car today but forgot to look at the window strips. So you just need the rubber piece, not the chrome? Your the third person in the last few days who asked about an air cleaner, but I'll see what I can find.
Here's a couple more items I pulled in case someone needs them. I also got the hood springs and bumpers (Part of the rear bumper is spoken for). If there's anything else you need speak up quickly! It will probably go away in the coming week. tribunicus let me know what you think about the glass.
John
P1010021-2.jpg
P1010003-1.jpg
P1010006-1.jpg
P1010007-1.jpg
P1010008-2.jpg
Shawn, I pulled the rear springs and here's a picture
P1010011.jpg
Gustav, I worked on the car today but forgot to look at the window strips. So you just need the rubber piece, not the chrome? Your the third person in the last few days who asked about an air cleaner, but I'll see what I can find.
Here's a couple more items I pulled in case someone needs them. I also got the hood springs and bumpers (Part of the rear bumper is spoken for). If there's anything else you need speak up quickly! It will probably go away in the coming week. tribunicus let me know what you think about the glass.
John
P1010021-2.jpg
P1010003-1.jpg
P1010006-1.jpg
#45
Last edited by J-(Chicago); October 26th, 2009 at 08:24 AM.
#46
So... is that what the axles are for Jeremy? Oh Man, I just recognized that as YOUR car!!!!!!!!!!!!!!!!1
Gustav, I pulled both back windows from the car. I'll get a closer look at the seals and post some pictures for you.
John
Last edited by 2blu442; October 26th, 2009 at 06:15 PM.
#47
ANY WORD ON AXLES?...VERY EASY TO REMOVE..REMOVE WHEEL,DRUM THEN 4) 5/8 NUTS AND EITHER USE SLIDE HAMMER OR REMOVE 1) BOLT AND USE SKINNY PUNCH AND HAMMER FROM BACK SIDE.....I HAVE JERKED ON THEM AS WELL AND GOT THEM OUT...PLEASE LMK...
THANKS...
SKINNY,IL......
THANKS...
SKINNY,IL......
#48
LOL I JUST POSTED THEN I SEE ALL THESE NEW POST AND PICS....WELL LMK HOW MUCH FOR THE PAIR AND WE CAN GO FROM THERE...
THANKS..
SKINNY,IL..
SKINNYSBUICK@AOL.COM
THANKS..
SKINNY,IL..
SKINNYSBUICK@AOL.COM
#49
Hi Skinny, email sent to SKINNYSOLDSMOBILE@AOL.COM
#54
Gustav, here's a couple photos of the window trim. The rubber looks good, It wouldn't easily come off the chrome trim but I was able to remove it from the glass. If you would send me your address in an email or PM I'll provide you with a price including shipping. John
P1010189-4.jpg
P1010190-3.jpg
P1010189-4.jpg
P1010190-3.jpg
#59
Hey John,,waitin on those pics of the bumper and cost of shipping to 47374,,send pics to allns47@yahoo.com
#63
John,,I cant even remember what else i have u holding for me..Could u give me a least,,I appreciate u holding them for me..I am back to work now and have some extra cash,,,So if u could send me a list,,,I know u have the a/c componets for me,,,What else? I have had so much on my mind about losing my job I am trying to get it back together again no that I am employed again,,,lol
#64
John,
Just went through some pieces I got with the car and found the main manifold assembly. A small piece is broken off, but I can fix it. Didn't recognize it with the section missing(not to mention I was looking at it upside down). So, don't worry about the order. I will contact you when I need other stuff, which is inevidible.
Thanks again for your efforts and great support.
Charlie
Just went through some pieces I got with the car and found the main manifold assembly. A small piece is broken off, but I can fix it. Didn't recognize it with the section missing(not to mention I was looking at it upside down). So, don't worry about the order. I will contact you when I need other stuff, which is inevidible.
Thanks again for your efforts and great support.
Charlie
#65
Cool! I'm glad you found the part. Thanks for letting me know. I hope to start on my 1968 this winter. When I do I'll be digging out the parts I've collected and will be selling the extras once I find what I needed. John
Shawn, I'll make a list but right off I know there were parts from the rear bumper. I think the tail light assemblies were in the box with the skirts you already got, but it's been too long since I packaged it up and don't remember for sure what all was in it. John
Shawn, I'll make a list but right off I know there were parts from the rear bumper. I think the tail light assemblies were in the box with the skirts you already got, but it's been too long since I packaged it up and don't remember for sure what all was in it. John
#70
More 1973 Olds 98 parts, updated 9/5/2010
While crawling through the garage looking for other items people have requested I came across a few things I believe came off the 1973 Olds 98. Here's some pictures. Let me know if you have any questions or want to see pictures of other views. I do have more pictures already posted at: http://s90.photobucket.com/albums/k2...20and%20Parts/
The rotors look almost new, so I'd like $40 for the pair plus shipping and they can ship US Postal large flat rate boxes, one in each box. The rest of the parts, $10 for one, $15 for two and $20 for three each plus shipping. Still looking for other items so I may update this as I find more. I do have the 455 but would like to sell it assembled as a complete engine. I have lots of core engines so if you need an engine part let me know.
P1010221.jpg
P1010262.jpg
P1010258-1.jpg
P1010260-1.jpg
P1010267-1.jpg
P1010264-1.jpg
P1010265-1.jpg
The rotors look almost new, so I'd like $40 for the pair plus shipping and they can ship US Postal large flat rate boxes, one in each box. The rest of the parts, $10 for one, $15 for two and $20 for three each plus shipping. Still looking for other items so I may update this as I find more. I do have the 455 but would like to sell it assembled as a complete engine. I have lots of core engines so if you need an engine part let me know.
P1010221.jpg
P1010262.jpg
P1010258-1.jpg
P1010260-1.jpg
P1010267-1.jpg
P1010264-1.jpg
P1010265-1.jpg
#76
David, I found one of the door handle surrounds with the lock switch but am still searching for the other one and the radio.
hkr, I know where the back seat panel with the clock is, but have not come across the other items yet. I've got a lot of "treasure" but it's not very organized
1973olds98, Shawn, are you describing the rear bumper section with license plate lights shown in the recent picture updates? If so there's a photo of the backside on the photobucket site, just click on the link. There is some damage to the rubber impact strip pieces but I think the rest looks good. No cut wires on the lights. $10 plus shipping for anything except the brake rotors on the updated photos. Quantity discounts if you see more things you can use
5025spd, are you looking for the valve covers with OLDSMOBILE stamped in them? Yes I do have some of those and will try to get some photos for you.
I came across a few more items today but haven't had time to take pictures and update the thread. Hope to soon.
hkr, I know where the back seat panel with the clock is, but have not come across the other items yet. I've got a lot of "treasure" but it's not very organized
1973olds98, Shawn, are you describing the rear bumper section with license plate lights shown in the recent picture updates? If so there's a photo of the backside on the photobucket site, just click on the link. There is some damage to the rubber impact strip pieces but I think the rest looks good. No cut wires on the lights. $10 plus shipping for anything except the brake rotors on the updated photos. Quantity discounts if you see more things you can use
5025spd, are you looking for the valve covers with OLDSMOBILE stamped in them? Yes I do have some of those and will try to get some photos for you.
I came across a few more items today but haven't had time to take pictures and update the thread. Hope to soon.
#78
5025spd, OK, I've got lots of those. But I'm in Oregon, if you check with some of the East Coast or even mid-west guys I'm sure you could save a couple bucks on shipping.
You might check with Eightupman as he's in Charlston S.C. and has access to lots of parts. I haven't seen any posts from him here in a while, so you may have to contact him at: http://www.oldspower.com/ John
You might check with Eightupman as he's in Charlston S.C. and has access to lots of parts. I haven't seen any posts from him here in a while, so you may have to contact him at: http://www.oldspower.com/ John
#79
2blu442...
Would you happen to have a nice column shifter lever for a 65 Cutlass?
Mine needs the end, would be interested in the end, or the whole shifter arm.
I do not need the whole column.
Thanks in advance...
Jim
Would you happen to have a nice column shifter lever for a 65 Cutlass?
Mine needs the end, would be interested in the end, or the whole shifter arm.
I do not need the whole column.
Thanks in advance...
Jim