and just what are these from?

Wayne_S · 03-15-2008, 10:20 AM

I helped a gent out by cleaning out his garage and I came up with these wheels. He thought they were from an old Cutless, but I don't have a clue.

They had the stainless trim around the opening that I took off, so I could media blast them and clean them up. 14x6 is the size and no center caps.

So masses, what have I?

Wayne S

joe_padavano · 03-15-2008, 03:12 PM

Quote:

Originally Posted by Wayne_S

I helped a gent out by cleaning out his garage and I came up with these wheels. He thought they were from an old Cutless, but I don't have a clue.

They had the stainless trim around the opening that I took off, so I could media blast them and clean them up. 14x6 is the size and no center caps.

So masses, what have I?

Wayne S

The silver wheel in the lower right of the first picture is a Camaro wheel. The others are 75-up Olds SSII/SSIII wheels. I actually thought the snap-in center wheels were 14x7. The only 14x6 that I'm aware of were the 68-69 SSII rims, but you have the tape measure.

Wayne_S · 03-15-2008, 03:21 PM

They are stamped on the inside 14x6JJ

Wayne S

joe_padavano · 03-15-2008, 07:04 PM

Quote:

Originally Posted by Wayne_S

They are stamped on the inside 14x6JJ

Wayne S

I guess I haven't owned enough G-body cars, then. Perhaps someone who knows more about the G-bodies can confirm that those cars used 14x6 SSIII rims? I DO know that the aluminum wheels on the 79 H/O were 14x6.

Oldsguy · 03-16-2008, 03:31 PM

Keep them or sell them to someone here. They aren't gold but they aren't doggy do either.
BTW, welcome to our site.

Wayne_S · 03-16-2008, 03:48 PM

Thank you...the old man was going to toss them in the scrap ($140 a ton down here) and I "offered" to clean up his garage for all the old stuff.

Can't stand waste when someone could use them.

Wayne S

J-(Chicago) · 03-16-2008, 05:36 PM

I also have a set of 14'' wheels laying around that I'd like to see someone use. Hopefully someone with a 68-69 cutlass

joe_padavano · 03-16-2008, 07:14 PM

Quote:

Originally Posted by J-(Chicago)

I also have a set of 14'' wheels laying around that I'd like to see someone use. Hopefully someone with a 68-69 cutlass

HMMM. That's awfully artsy...

Oldsguy · 03-17-2008, 08:12 AM

Those headlight doors ARE worth gold, keep them.

03-15-2008, 10:20 AM	#1 (permalink)
Wayne_S BOPer Join Date: Mar 2008 Location: Razorback Country Posts: 5	and just what are these from? I helped a gent out by cleaning out his garage and I came up with these wheels. He thought they were from an old Cutless, but I don't have a clue. They had the stainless trim around the opening that I took off, so I could media blast them and clean them up. 14x6 is the size and no center caps. So masses, what have I? Wayne S

03-16-2008, 03:31 PM	#5 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,757	Keep them or sell them to someone here. They aren't gold but they aren't doggy do either. BTW, welcome to our site. __________________ Dan '46 2 door

03-17-2008, 08:12 AM	#9 (permalink)
Oldsguy Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 2,757	Those headlight doors ARE worth gold, keep them. __________________ Dan '46 2 door

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

03-15-2008, 03:21 PM	#3 (permalink)
Wayne_S BOPer Join Date: Mar 2008 Location: Razorback Country Posts: 5	They are stamped on the inside 14x6JJ Wayne S

03-16-2008, 03:48 PM	#6 (permalink)
Wayne_S BOPer Join Date: Mar 2008 Location: Razorback Country Posts: 5	Thank you...the old man was going to toss them in the scrap ($140 a ton down here) and I "offered" to clean up his garage for all the old stuff. Can't stand waste when someone could use them. Wayne S