Vaccum lines?

1972_442 · 03-12-2008, 03:03 PM

could someone tell where the vaccum ports to the carb hook up to. its a holley 4bbl 650 the a short metal tube on the opposite side of the throttle linkage thats sucking air, i put my finger over it and the engine runs a lot smoother so for right now i just have that line plugged but i have the feeling that it goes to something.

speedy_87ss · 03-17-2008, 11:40 PM

the only one you need to worry about is vacuum advance. RH side of metering block. Any others, cap them.

03-12-2008, 03:03 PM	#1 (permalink)
1972_442 Junior Member Join Date: Nov 2007 Location: charlotte,nc Posts: 10	Vaccum lines? could someone tell where the vaccum ports to the carb hook up to. its a holley 4bbl 650 the a short metal tube on the opposite side of the throttle linkage thats sucking air, i put my finger over it and the engine runs a lot smoother so for right now i just have that line plugged but i have the feeling that it goes to something.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Need 1985 vaccum diagram...	a6m5zerosen	Small Blocks	0	01-14-2008 05:11 PM
Air in brake lines	54olds	Brakes/Hydraulic Systems	8	10-31-2007 07:24 PM
convertable hydrolic lines	dynamic88	Brakes/Hydraulic Systems	3	08-02-2007 08:52 PM
vacuum lines	terribleonexx88	Small Blocks	8	03-16-2007 12:00 PM
vac lines	<zeke>	Other	1	08-07-2004 09:09 PM

03-17-2008, 11:40 PM	#2 (permalink)
speedy_87ss Junior Member Join Date: Feb 2008 Posts: 23	the only one you need to worry about is vacuum advance. RH side of metering block. Any others, cap them.