Fabricators for Fifties

mokicruz · October 8th, 2006, 12:02 PM

I Just Bought a 55 Olds 88 or 98 with no title and no left front fender, What is there is Straight . The floor and trunk are badly rusted but nothing visiblely wrong with the rockers. There a lot of parts to buy if I go original so my intent right now is to buy a Cadillac to use the interior, dash, frame, floorpan and drivetrain to mount the body to. I've located sevral 2000 and up Cadies with front wheel drive. Another option is the S10 4wheel drive frame and floorpan ect. with a lowering kit simlar to a 56 chevy setup for autocross. It was Featured in a classic Car Pulication sevral years back stating it had times as fast as the Art Morrison 55 GT with less power due to the four wheel drives traction. Does this site have fabricators doing anything along this line ?

Oldsguy · October 9th, 2006, 07:47 AM

I moved your post to it's own thread, you might get some responses that way and welcome to our site. If you plan on that much work why not just repair what you have? It's not like you are going to try and RESTORE it so you don't have to worry about costs. Just a thought.

mokicruz · October 10th, 2006, 12:12 PM

I have set bodies on floorpans and frames before but I had seen which Caprice to put under 57 chevy 4 door. It wasn't as hard as what some People do just modifing an old frame . thanks for the help .

October 8th, 2006, 12:02 PM	#1 (permalink)
mokicruz Junior Member Join Date: Oct 2006 Location: Lodge Grass Montana Posts: 7	Fabricators for Fifties I Just Bought a 55 Olds 88 or 98 with no title and no left front fender, What is there is Straight . The floor and trunk are badly rusted but nothing visiblely wrong with the rockers. There a lot of parts to buy if I go original so my intent right now is to buy a Cadillac to use the interior, dash, frame, floorpan and drivetrain to mount the body to. I've located sevral 2000 and up Cadies with front wheel drive. Another option is the S10 4wheel drive frame and floorpan ect. with a lowering kit simlar to a 56 chevy setup for autocross. It was Featured in a classic Car Pulication sevral years back stating it had times as fast as the Art Morrison 55 GT with less power due to the four wheel drives traction. Does this site have fabricators doing anything along this line ?

October 9th, 2006, 07:47 AM	#2 (permalink)
Oldsguy Hot Rodder at heart Administrator Join Date: May 2004 Location: Lees Summit MO Posts: 5,799	I moved your post to it's own thread, you might get some responses that way and welcome to our site. If you plan on that much work why not just repair what you have? It's not like you are going to try and RESTORE it so you don't have to worry about costs. Just a thought. __________________ Dan '77 Cutlass Supreme '46 2 door "The rocket 455.....it's a sledgehammer approach to a thumbtack world" LuxBlue of HAMB.

October 10th, 2006, 12:12 PM	#3 (permalink)
mokicruz Junior Member Join Date: Oct 2006 Location: Lodge Grass Montana Posts: 7	Something Different I have set bodies on floorpans and frames before but I had seen which Caprice to put under 57 chevy 4 door. It wasn't as hard as what some People do just modifing an old frame . thanks for the help .

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode