1967 Cutlass Rear Panels

Dapapadon · March 3rd, 2008, 09:21 PM

I started pulling the interior panels on my 67 Cutlass Supreme last week. I've got everything off but the upper rear panels. The lower, armrest part is off. As is the upper seat filler part. I removed all the screws and the panel seems to be holding near the window. So is there a trick to this or what. It looks like it needs to come forward and up. I've pried, pulled & pushed. I afraid if I keep prying & pulling I'll destroy them. Anybody know what I'm missing?

Thanks, Don

1k442 · March 4th, 2008, 01:37 PM

Is this the side panel below the window? If it is there maybe 1 or 2 screws that go through the window fuzzies. You need to drop the quarter glass and find the screws.
Ken

Oldsmaniac · March 4th, 2008, 01:39 PM

Most have clips attached to the panel at the top. You should be able to to remove the panels by pushing in toward the glass then lifting up at the same time.

Dapapadon · March 4th, 2008, 09:52 PM

Thanks! I'll check/try both when I get time.

Don

44TEETWO · March 6th, 2008, 04:40 PM

Quote:

Originally Posted by Dapapadon

Thanks! I'll check/try both when I get time.

Don

Don I have a complete assembly manual for my 67 I am in the final stages of assembly with. I would be glad to copy the pages that show the panels or you are welcome to take a trip down to Lebanon and look at mine. I have the entire interior still out of mine. If i remember there are screws behind the roof line panels, the ones with the lights in them. I really don't remember for sure bacause mine came apart over a year ago! Let me know if I can help.

March 3rd, 2008, 09:21 PM	#1 (permalink)
Dapapadon Registered User Join Date: Jan 2007 Location: Portland, OR Posts: 364	1967 Cutlass Rear Panels I started pulling the interior panels on my 67 Cutlass Supreme last week. I've got everything off but the upper rear panels. The lower, armrest part is off. As is the upper seat filler part. I removed all the screws and the panel seems to be holding near the window. So is there a trick to this or what. It looks like it needs to come forward and up. I've pried, pulled & pushed. I afraid if I keep prying & pulling I'll destroy them. Anybody know what I'm missing? Thanks, Don

March 4th, 2008, 01:37 PM	#2 (permalink)
1k442 Registered User Join Date: Apr 2007 Location: Long Branch, NJ Posts: 73	Rear panel Is this the side panel below the window? If it is there maybe 1 or 2 screws that go through the window fuzzies. You need to drop the quarter glass and find the screws. Ken

March 4th, 2008, 01:39 PM	#3 (permalink)
Oldsmaniac Registered User Join Date: Oct 2005 Location: NJ Posts: 702	Most have clips attached to the panel at the top. You should be able to to remove the panels by pushing in toward the glass then lifting up at the same time. __________________ OCA Member 2587 '59 98 conv. '66 Delta Fact.4spd '66 Delta conv. '67 442 post trac pac '67 442 conv. '68 Cutlass conv. '70 Rallye 350 '92 Custom Cruiser

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
1967 Cutlass body	Pastor Dave	Parts Cars For Sale	4	July 28th, 2009 06:55 AM
New to the forums, my 1967 cutlass	carmine615	Cutlass	10	March 29th, 2008 11:16 AM
1987 Cutlass body panels	marcar1993	Chassis/Body/Frame	7	April 21st, 2007 06:26 AM
1967 rear seats	jimmrd	Interior/Upholstery	1	March 13th, 2007 10:24 PM
1967 442 sway bar and rear seat	Carleta	Parts Wanted	0	July 4th, 2006 12:44 PM

March 4th, 2008, 09:52 PM	#4 (permalink)
Dapapadon Registered User Join Date: Jan 2007 Location: Portland, OR Posts: 364	Thanks! I'll check/try both when I get time. Don